Ibrid Nano has arrived !!!

[Pats300zx]

I guess I am part of the “Big Boy” club now. Big thanks to Andre for all his helping and answering my questions. Outstanding service as always.

[Sicoupe]

Congrats! love mine.

[Angus]

Very nice, Pat!

[Mike Phillips]

Here's where this tool really shine.... (no pun intended)

For doing correction work, install the rotary spindle and use the 1" pads.

For spot sanding, install the 3mm eccentric unit and cut your own sanding discs out of 3M Trizact and Mirka Abralon


For general polishing, use the 12mm eccentric unit and the 2" pads.

[Mike Phillips]

There's not much info out in the blogosphere on these tools, here's this...


RUPES Terms - Eccentric Set and Orbit Connector - Nano iBrid Tools

The RUPES iBrid in ACTION! - Thin panels and tight areas!

RUPES 2" Backing Plate not for use with the rotary connector and the RUPES Nano iBrid in Rotary Mode

[Pats300zx]

Here's where this tool really shine.... (no pun intended)

For doing correction work, install the rotary spindle and use the 1" pads.

For spot sanding, install the 3mm eccentric unit and cut your own sanding discs out of 3M Trizact and Mirka Abralon


For general polishing, use the 12mm eccentric unit and the 2" pads.

Thanks for the tips Mike !!!