Dislikes: 0
-
Super Member
Re: Do you prime each pad before use when correcting or polishing?
I use Mike's method and retire each pad much earlier now compared to my old method of 3-5 dots or thin x pattern. Because I have adopted Mike's priming method I'm using a lot more pads per job but my results have improved.
I do like the logic of having as much product working each section. I'll go 2, maybe 3 sections and swap out and prime a fresh, clean pad and have seen firsthand results improved.
I'm trying to convince anyone...just my experience.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Do you prime each pad before use when correcting or polishing?
Originally Posted by Paul A.
I use Mike's method and retire each pad much earlier now compared to my old method of 3-5 dots or thin x pattern. Because I have adopted Mike's priming method I'm using a lot more pads per job but my results have improved.
I do like the logic of having as much product working each section. I'll go 2, maybe 3 sections and swap out and prime a fresh, clean pad and have seen firsthand results improved.
I'm trying to convince anyone...just my experience.
Exactly Mike's point of "Find something that works, and stick with it".
All of us have adopted our own methods, and we like to share those with the AGO crowd.
Funny thing is, it is all these methods that both inform and drive a newbie completely insane at the same time. (Speaking from experience). Lol
It is no coincidence that man's best friend cannot talk.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Do you prime each pad before use when correcting or polishing?
Originally Posted by Paul A.
I use Mike's method and retire each pad much earlier now compared to my old method of 3-5 dots or thin x pattern. Because I have adopted Mike's priming method I'm using a lot more pads per job but my results have improved.
I do like the logic of having as much product working each section. I'll go 2, maybe 3 sections and swap out and prime a fresh, clean pad and have seen firsthand results improved.
I'm trying to convince anyone...just my experience.
I tried it a couple times - even recently, and it worked very well!
I used M100 with some standard orange LC flats, which seemed like the perfect type of pad for that priming method.
The green Buff and Shine pads I use to cut have a more open cell structure, which just ends up getting over saturated using that method, very quickly.
-
Super Member
Re: Do you prime each pad before use when correcting or polishing?
Yes, I always prime the pad. You can work without doing it, but the problem is that the areas on your pad without product on it will not be working to correct or polish. So if half your pad has no product on it, you are only 50% effective meaning it will take you twice as long to achieve the same result. Up to you
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Do you prime each pad before use when correcting or polishing?
Originally Posted by Calendyr
Yes, I always prime the pad. You can work without doing it, but the problem is that the areas on your pad without product on it will not be working to correct or polish. So if half your pad has no product on it, you are only 50% effective meaning it will take you twice as long to achieve the same result. Up to you
Isn’t it impossible for that to actually happen? I mean if that were true, there’d be open gaps when you go to wipe off the polish.. And since there’s never any dry gaps when wiping off, then that means that even the dry areas of the unprimed pad have come in contact with the polish within the 1st couple of seconds of you turning the polisher on.
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Re: Do you prime each pad before use when correcting or polishing?
Originally Posted by Calendyr
Yes, I always prime the pad. You can work without doing it, but the problem is that the areas on your pad without product on it will not be working to correct or polish. So if half your pad has no product on it, you are only 50% effective meaning it will take you twice as long to achieve the same result. Up to you
The polish is meant to be on the paint surface more than the face of the pad. You actually reduce cut with a primed pad as you have a more slipping surface than a working surface. I never ever prime pads.
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Re: Do you prime each pad before use when correcting or polishing?
Originally Posted by Paul A.
I use Mike's method and retire each pad much earlier now compared to my old method of 3-5 dots or thin x pattern. Because I have adopted Mike's priming method I'm using a lot more pads per job but my results have improved.
I do like the logic of having as much product working each section. I'll go 2, maybe 3 sections and swap out and prime a fresh, clean pad and have seen firsthand results improved.
I'm trying to convince anyone...just my experience.
Me too!
Originally Posted by Eldorado2k
Here’s the same pad that I posted a picture of earlier in this thread. [yes it’s been laying around dirty for the past 10 days] I used this 1 pad to polish the whole car [Cadillac CTS]
Notice how the circle where I initially applied the polish is easily visible and it’s the only area of the pad that could be described as “overly saturated” whereas the rest of the pad remains pretty fresh [especially considering it was used to polish an entire vehicle]
-If I had primed the whole face of the pad I’d most likely be looking at the entire surface being over saturated to the point where it’s no longer usable. But since I didn’t prime the pad, it allowed the pad to remain fresh for much longer, with just the right amount of moisture from the polish to be effective without ever coming close to clogging the pores. [cleaning on the fly is vital]-
Some people may scoff at the fact that I only used 1 pad to polish the entire vehicle... But 1st of all, this is a 7” pad. It covers a much larger area compared to a tiny 5” pad.
Plus I was polishing a vehicle that’s already in near perfect condition, so there was no heavy duty stuff going on.. I was simply polishing to max out the gloss on the paint. And my results are good.
Contrary to popular belief, I don’t have to go through a Ton of pads for a simple quik polish of the vehicle. IMO Not priming the foam pad is a major+ and also results in a better user experience.
I don't agree with your method but Can't argue with that. Is it possible you would have gotten better results with more pads?
-
Re: Do you prime each pad before use when correcting or polishing?
Originally Posted by Ronin47
The polish is meant to be on the paint surface more than the face of the pad. You actually reduce cut with a primed pad as you have a more slipping surface than a working surface. I never ever prime pads.
Can you prove that? I say "You actually reduce cut" by not priming the pad because you have less abrasives.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Do you prime each pad before use when correcting or polishing?
Originally Posted by lalojamesliz
When I first did my SUV with my pc7424xp I was following directions from chemical guys with 4-5 drops and a spray of pad conditioner usually just on a clean pad right before it got used
Do any of you guys ever use pad conditioner or something similar? I think it's like claybar lube
I use it sparingly
Similar Threads
-
By geoguy in forum Auto Detailing 101
Replies: 12
Last Post: 03-07-2019, 02:51 PM
-
By Dave Hamlin in forum Ask your detailing questions!
Replies: 2
Last Post: 01-17-2017, 02:24 PM
-
By Nav45 in forum Auto Detailing 101
Replies: 5
Last Post: 02-22-2016, 09:50 PM
-
By Thumpr in forum Ask your detailing questions!
Replies: 4
Last Post: 04-20-2015, 03:30 PM
-
By lempilot in forum Auto Detailing 101
Replies: 8
Last Post: 08-19-2008, 11:40 AM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks