Thanks: 0
Likes: 0
Dislikes: 0
-
What recommend coating for HOT environment?
I need to search better.... nevermind guys
-
Re: What recommend coating for HOT environment?
Practically all ceramic coatings are formulated to endure very high temperatures, like multiple hundred degrees - way above what your paint will be exposed to, even in the warmest climates and on the warmest days, if it's just standing in the Sun. So, the only temperature you should worry about should be ambient temperature during application, which should fall in the recommended range for the particular coating you will be using. If you go below that, it will take ages for the coating to cure, and if you go above it, you'll have trouble leveling the product and removing the high spots, resulting in a poor finish and sub-par durability or performance.
-
Re: What recommend coating for HOT environment?
I was just wondering if some handle the heat better. A guy here starter a thread for the same question. He's in AZ
I saw that thread before but I wasn't looking at coatings until now so I don't pay much attention
Thanks for answer
-
Re: What recommend coating for HOT environment?
I just ordered a gallon of Optimum Car Wax.... I'll use it like once a month when it gets hot or as needed.
-
Re: What recommend coating for HOT environment?
Originally Posted by lalojamesliz
I was just wondering if some handle the heat better.
As already said, they handle temperatures extremely well. Most of them can be used safely even in the engine bay, where you can have temperatures well over 100 °C / 200 °F. You won't have ever anything just close to that on the outer surface of your car, unless you shove it into an infrared heat curing chamber.
-
Re: What recommend coating for HOT environment?
Yeah, I saw that. I was just saying why I started this thread. I wasn't asking again
-
Re: What recommend coating for HOT environment?
Originally Posted by lalojamesliz
I just ordered a gallon of Optimum Car Wax.... I'll use it like once a month when it gets hot or as needed.
Good plan. Good solid product
Sent from my iPhone using Tapatalk
-
Super Member
Re: What recommend coating for HOT environment?
So you want a product to handle hot environments and after searching you went with a Wax? Waxes are the worst of the last step products you can use in hot environments... more than just a bit confused here.
-
Super Member
Re: What recommend coating for HOT environment?
IMO:
•With its mixture consisting of both
(Syn.)Polymers and Carnauba Wax:
-Optimum Car Wax is more in the
vein of being a “Hybrid-Sealant”; not
so much a “traditionally natural” Wax.
•OP opted for a really decent LSP.
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Re: What recommend coating for HOT environment?
Originally Posted by lalojamesliz
I need to search better.... nevermind guys
The best I find in hot application because I'm mobile sometimes a garage is not available would be gtech serum or mc kees 37 coating.
Similar Threads
-
By XJL in forum Ask your detailing questions!
Replies: 5
Last Post: 02-22-2020, 01:05 AM
-
By Grifftech in forum Auto Detailing 101
Replies: 3
Last Post: 03-05-2018, 07:40 PM
-
By PA DETAILER in forum Auto Detailing 101
Replies: 5
Last Post: 03-02-2018, 10:57 AM
-
By ywcsam in forum Auto Detailing 101
Replies: 22
Last Post: 11-19-2017, 06:28 PM
-
By jay23ls in forum Auto Detailing 101
Replies: 23
Last Post: 10-19-2016, 03:27 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks