-
Soap for foam cannon for ceramic coated cars (CQuartz)
Finally got my both cars ceramic coated using CQUK and CQ TiO2. I've got me a pressure washer/foam cannon setup and wonder now what soap to use for some foaming action. I've got roughly half of a gallon left of CG Mr. Pink and not sure if that will be ok to use it. I mean, soap is soap but I'm not sure if this particular soap has wax/gloss intensifiers that can potentially hinder/affect coating properties. What do you pros recommend to use? I do have reset although it doesn't foam that thick (at least in my cannon) plus it's a bit pricey and I'd like to use the left overs that I have
-
Re: Soap for foam cannon for ceramic coated cars (CQuartz)
Can't go wrong with Megs HyperWash. It is coating safe and rinses clean.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Soap for foam cannon for ceramic coated cars (CQuartz)
I have both my cars coated in Polish Angel Viking coat. I have been using CG Honeydew, Polish Angel Glissante, and for dusty days Car Pro Echo 2 WW. Haven’t had any issues at all with any
-
Super Member
Re: Soap for foam cannon for ceramic coated cars (CQuartz)
Reset is the go to soap for coated vehicles. Reset leaves nothing behind.
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Soap for foam cannon for ceramic coated cars (CQuartz)
-
Re: Soap for foam cannon for ceramic coated cars (CQuartz)
Car pro Reset designed for coatings, works well in a foam cannon or foam gun.
Hard Shine Auto Detailing, LLC IDA CD-SV
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Soap for foam cannon for ceramic coated cars (CQuartz)
McKee's clogged my foamer screen when I did not run a rinse bottle through it. Soaking overnight in CLR cleared it.
Kirk Harrod's Mobile Detailing, Frankfort, KY
Official Detailer of Camarofest 8 & 9
No one has detailed more Camaros.
-
Super Member
Re: Soap for foam cannon for ceramic coated cars (CQuartz)
I would go with Gyeon Bathe or Bathe Essence to start. Essence is the more concentrated version and most videos I've watched seem to like it very much, especially from a cost stand point and it does finish clean, nothing in there but soap
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
-
Post Thanks / Like - 0 Thanks, 0 Likes, 1 Dislikes
-
Super Member
Re: Soap for foam cannon for ceramic coated cars (CQuartz)
Not sure if you really need a foam cannon. With both vehicles coated, I think a good rinse and just the regular wash medium will do wonders. Reset is more expensive but it does an excellent job of cleaning, probably one of the strongest non-APC soaps out there.
2016 Mazda 3 Sports GT
2015 Lexus IS250 F Sport
-
Re: Soap for foam cannon for ceramic coated cars (CQuartz)
I would get a prewash foam like gtechnic w4 citrus foam or gyeon foam. Foam and clean rinse from the bottom up and then your normal washing procedure. In the summer months a Ech2o diluted in QD if wanted to a little reload in it after foaming and clean rinsed. As a car soap I like reset but gyeon bathe essence or bathe would be fine.
Bookmarks