Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: Poll: Do you wash after claying?
Originally Posted by TexasTeacher
Thank you ski2 for your input about "Rinseless wash". I plan to use Wolfgang's Uber RW first. Then, clay my 2005 G35 especially on surface panels. I will probably need to wait a full day to wax (I am a retired teacher). Lastly, I am thinking I could use Meg's Spray wax, unless I can figure out another easy on, easy off wax.
Can you recommend one?
Note that I use a rinseless wash as a clay lube so no need to wash after claying.
Megs Ultimate Fast Finish as mentioned above or Ultima Acrylic Spray Wax are my favorites.
-
Re: Poll: Do you wash after claying?
I usually don't. I use nanoskin sponges and a rinseless. I do one section and wipe down, then move on. If its white, silver, etc., I may wash and then go straight to a lsp. If it is a darker color, I will use at minimum, a nice finishing polish before lsp to remove any marring from the nanoskin. Then wash after the polish, then lsp.
-
Super Member
Re: Poll: Do you wash after claying?
Originally Posted by chet31
Just to clarify, you apply Iron-X to a dirty car?
Correct. It can be applied to a dirty vehicle as long as you don't agitate with a mitt and just rinse it off.
-
Re: Poll: Do you wash after claying?
Rinse with pressure washer
Foam
2-bucket wash
Rinse
Re-foam
Griot's Garage surface prep mitt (fine/yellow) with foam as lube
Rinse
LSP or polish
This has worked beautifully for me for about a year now. Massive time savings from not having to clay and re-wash.
-
Super Member
Re: Poll: Do you wash after claying?
You can NEVER be too clean, wash away I say
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
-
Re: Poll: Do you wash after claying?
I do not. I keep the entire process simple and always keep moving forwards.
-
Regular Member
Re: Poll: Do you wash after claying?
I have always used a clay bar with soapy water for a lube. Can't imagine not washing it again after this process. The claying always seems to leave a film behind.
The difference is I do this only for myself. Does not matter if I waste twenty minutes giving it a quick wash after claying.
If I did this for a living however, I would change to the nanoskin or similar product if it could eliminate the second wash.
Dave
2017 Toyota Tundra
2013 M37S Infinity
2007 BMW 335i convertible
-
Super Member
Re: Poll: Do you wash after claying?
I always wash between steps
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
Similar Threads
-
By spewking in forum Auto Detailing 101
Replies: 3
Last Post: 08-26-2014, 10:42 PM
-
By spewking in forum Auto Detailing 101
Replies: 15
Last Post: 06-22-2014, 07:43 PM
-
By spewking in forum Auto Detailing 101
Replies: 11
Last Post: 06-21-2014, 10:56 PM
-
By newb001 in forum Auto Detailing 101
Replies: 12
Last Post: 06-15-2011, 03:47 PM
-
By langridge in forum Auto Detailing 101
Replies: 3
Last Post: 06-27-2008, 04:36 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks