10' OR 25' Cord

[2black1s]

I guess this topic boils down to personal preference. For me personally, I'll take the short cord on the machine and use an extension cord. Long cords on machines are a pain in the ass to coil up and stow. I had to replace a cord on my old rotary and I had a long cord laying around from an old vacuum cleaner so I used it... I hate it!

[nine]

Thanks for the replies. I've decided the 10' will suit me

[dcjredline]

I've got the 25 on my GG6 which was my first purchase, when I bought my FLEX I decided to try the 10'. If I had to choose only one I would have them both 10's. When the 25 is wrapped up it is really hard to put back in he original box, and if you leave it out there is a whole lotta cord to lay next to it. I've got plugs every 6 feet in my garage and extension cords in one of each outlets. The 10 suites me better. I do like no needing needing the extension just don't like it as much as I dislike the 25 when rolled up.

[PPLd]

I am a mobile guy, so with my own power supply etc., cord length doesnt really matter