XMT Swirl Removers via Rotary?

[AjNavo61490]

what speeds do i use my XMT Swirl Remover #3 w/ LC Orange Pad and my XMT Swirl Remover #1 w/ LC White Pad?

[D]

XMT was made to be used with the PC, so probably a low speed. Just go out and give it a shot.

[justin_murphy]

I'm reading my bottles of XMT write now and there is no recommendation for rotary use. I would do with what D&D said. You might want to use a little more than you would with the PC since it's designed to break down with less heat.

Do a small test area and take your time. Let us know your results!

[AjNavo61490]

XMT was made to be used with the PC, so probably a low speed. Just go out and give it a shot.

well looking on autogeek it says its made for D/A or Rotary use... so it can be used with a rotary it looks like

[D]

well looking on autogeek it says its made for D/A or Rotary use... so it can be used with a rotary it looks like

You're right. Could of sworn it was designed to be used with the PC. Well, guess the best thing to do is call AG! Id guess something like 1000 1200 would be fine. But sometimes you have to experiment to get optimal results.

[DantheMan]

I tried it once on a whim and didn't have much luck.. flashing instantly on spreading and turning itself into solid concrete leaving a huge mess, even at 900rpm.. I guess maybe the car and weather conditions might have played a role, but swapping back over to the PC got me through the job..