griots microfiber and pad cleaner during detail?

[fightnews]

can u put some pad cleaner in a spray bottle and mist it on to clean pads in between panels on the fly?

[GSKR]

I would just get more pads.Or clean it on the fly how Mike Phillips tought with out any cleaner.

[Mike lambert]

I would not, blowing out after each pass is better if you can.

[TTQ B4U]

use air or a small brush and fluff as you go. i normally change pads ever 2 panels and as I go I tend to spin them against a small brush to clean and fluff them as I move along.

[fightnews]

I would not, blowing out after each pass is better if you can.

i could set something up for that

[Mantilgh]

I believe the pad cleaner would probably need to be rinsed from the pad and the pad dried before using again. I could be wrong though

[fightnews]

I believe the pad cleaner would probably need to be rinsed from the pad and the pad dried before using again. I could be wrong though

i think ur right im just going to clean it the usual way thanks

[goldenlight]

I usually use 3 pads to clean a midsize car.. I havn't personally tried this.. But maybe you can clean the pads then used the polisher at full speed to help dry the pads.

[fightnews]

I usually use 3 pads to clean a midsize car.. I havn't personally tried this.. But maybe you can clean the pads then used the polisher at full speed to help dry the pads.

thats not a bad idea

[WRAPT C5Z06]

Blow out with a compressor or use a pad brush after each pass.