Thanks: 0
Likes: 0
Dislikes: 0
-
Cars with satin black wheels/powder coated (black)..
Do you guys charge more for cars that have these wheels? I spend about an hour to clean the wheels fully, especially the ones that do not have a coating on it and feels sandy on touch. Just recently did a BMW m4 2015 with OZ satin black finish wheels. After cleaning the wheels, the wheels still look dirty even when it is clean. Talked to the owner and he said he bought the car used with the wheels. I guess the previous owner or detailer did not use the right chemicals and tools to clean the wheels since it has a lot of streaking, spots, fading, and spot failing. Even after cleaning the wheels, when I pull the car out of the garage, the wheels are sprinkled with orange brake dust and looks a bit dirty. Am I doing something wrong here or is this normal? I would usually clean the brake dust off with Dr beasleys.
Thanks!
-
Re: Cars with satin black wheels/powder coated (black)..
I've noticed my matte powdercoated Method Race wheels always seem to look dirty. The matte finish seems to hold crap better. Mine are coated with PBL, but it only helps so much on matte finished wheels.
-
Super Member
Re: Cars with satin black wheels/powder coated (black)..
Matte black wheels are impossible to keep immaculate. They will eventually take on whitish or brownish stains from brake dust or other random contaminates. My car has matte black wheels that i may refinish eventually, they're far from perfect. Even when cleaning with something really strong like Meguiar's Wheel Brightener, there's still some slight brownish brake dust stains on the matte surfaces. You need to dress a matte black wheel to make them pop. It gives a matte black wheel a very nice satin finish. I recommend Meguiar's D4510 or Adam's In & Out (expensive for what you get). I have a case of Stoner Trim Shine that i'll be trying soon as well.
Here's a pic of the wheel that's cleaned and dressed:
-
Re: Cars with satin black wheels/powder coated (black)..
Originally Posted by Ebg18t
I've noticed my matte powdercoated Method Race wheels always seem to look dirty. The matte finish seems to hold crap better. Mine are coated with PBL, but it only helps so much on matte finished wheels.
When I detail cars with satin black finishes (uncoated), looks clean until I pull it out of the garage. Pressing on the brakes releases orange brake dust, making it look dirty again!
-
Re: Cars with satin black wheels/powder coated (black)..
Originally Posted by anonymoususer
Matte black wheels are impossible to keep immaculate. They will eventually take on whitish or brownish stains from brake dust or other random contaminates. My car has matte black wheels that i may refinish eventually, they're far from perfect. Even when cleaning with something really strong like Meguiar's Wheel Brightener, there's still some slight brownish brake dust stains on the matte surfaces. You need to dress a matte black wheel to make them pop. It gives a matte black wheel a very nice satin finish. I recommend Meguiar's D4510 or Adam's In & Out (expensive for what you get). I have a case of Stoner Trim Shine that i'll be trying soon as well.
Here's a pic of the wheel that's cleaned and dressed:
I will try your products. Is your wheels coated or uncoated?
-
Super Member
Re: Cars with satin black wheels/powder coated (black)..
I also have a set of matte black Method Race wheels on my tundra with 35's and Hawk pads. If I don't wash them for a month or so my routine is this.
-1st wash with Megs d143
-2nd wash with IronX gel (I apply directly to wool 4finger wash mitt and really work it in)
-seal with Hydr02 (gives that nice satin look)
Now they are going on 4 years old and do have some very minor brown stains but it's not noticeable unless
you're right up on the wheel.
-
Super Member
Re: Cars with satin black wheels/powder coated (black)..
Originally Posted by Maestro Sam
I will try your products. Is your wheels coated or uncoated?
Uncoated. I'm planning to coat the wheel, not just yet though since i am considering refinishing.
-
Re: Cars with satin black wheels/powder coated (black)..
Originally Posted by fly07sti
I also have a set of matte black Method Race wheels on my tundra with 35's and Hawk pads. If I don't wash them for a month or so my routine is this.
-1st wash with Megs d143
-2nd wash with IronX gel (I apply directly to wool 4finger wash mitt and really work it in)
-seal with Hydr02 (gives that nice satin look)
Now they are going on 4 years old and do have some very minor brown stains but it's not noticeable unless
you're right up on the wheel.
I never use any iron x products on the wheels, just mild products like CG matte auto wash. Wouldn't iron x or the gel cause reaction on these types of wheels? I have hydro02 that I have not used for a long time, maybe I will give it a try!
-
Re: Cars with satin black wheels/powder coated (black)..
Originally Posted by anonymoususer
Uncoated. I'm planning to coat the wheel, not just yet though since i am considering refinishing.
Get it coated, I hate working on uncoated satin matte wheels! BTW what model Porsche is that on your profile picture?
-
Super Member
Re: Cars with satin black wheels/powder coated (black)..
Originally Posted by Maestro Sam
I never use any iron x products on the wheels, just mild products like CG matte auto wash. Wouldn't iron x or the gel cause reaction on these types of wheels? I have hydro02 that I have not used for a long time, maybe I will give it a try!
I have been using ironX gel on my wheels and a set on a buddy's truck for years and have had Zero issues.
Similar Threads
-
By bcgreen in forum Tricks, Tips and Techniques
Replies: 2
Last Post: 07-28-2018, 09:35 PM
-
By Regency in forum Auto Detailing 101
Replies: 5
Last Post: 11-30-2014, 01:43 AM
-
By scnsaracer in forum Ask your detailing questions!
Replies: 5
Last Post: 09-05-2014, 04:30 PM
-
By andrew8729 in forum Show N' Shine
Replies: 13
Last Post: 01-07-2014, 08:53 AM
-
By Regency in forum Auto Detailing 101
Replies: 11
Last Post: 06-25-2013, 06:34 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks