Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: Top HD Speed with...
I am after longevity. I like HD Speed, but think reload can go on when drying and give an extra couple months of protection.
-
Super Member
Re: Top HD Speed with...
Originally Posted by scuff
The OP might not have a polish on hand that will correct as well or as fast as 3D HD Speed, and wants to enhance the end results of an AIO product.
What you said.
And the Poxy will extend the durability. For me when I use Speed I always top with Poxy as it only takes about 15-20 minutes to apply with a da and about the same to remove. I pick up my work area while I let it cure. My thought is if I spent the time correcting the paint why not add the additional layer. But that's just my personal preference. It also depends on the level of correction required whether I use Speed or Adapt, either way I'll finish off with Poxy.
2013 Genesis Coupe 3.8 Track Edition
2015 Hyundai Sonata Limited, 2016 Pearl White Nissan Altima SR
2019 Nissan Rogue SL
-
Super Member
Re: Top HD Speed with...
I would top with Proxy but I just detailed my truck today and topped with Blackfire.
-
Super Member
Re: Top HD Speed with...
Originally Posted by Coopers ST
I am after longevity. I like HD Speed, but think reload can go on when drying and give an extra couple months of protection.
You did see where I posted that Car Pro says don't apply reload on top of a wax? As you know Speed has Poxy in it. I'm thinking they say this for reasons of bonding to the paint vs bonding to the wax which would most likely effect longevity. Make sense? I'm just thinking off the cuff on this.
2013 Genesis Coupe 3.8 Track Edition
2015 Hyundai Sonata Limited, 2016 Pearl White Nissan Altima SR
2019 Nissan Rogue SL
-
Super Member
Re: Top HD Speed with...
Originally Posted by Coopers ST
I am after longevity. I like HD Speed, but think reload can go on when drying and give an extra couple months of protection.
I have some Speed arriving tomorrow that's going on a work truck. If Menzerna FMJ agrees with it, I'll be doing the same thing. I figure I have to use up the rest of the FMJ anyway, so why not extend the life of the Speed?
-
Re: Top HD Speed with...
I use Poxy and then used CarPro hydro. Loved the results, ease of use and longevity.
-
Super Member
Re: Top HD Speed with...
Originally Posted by custmsprty
You did see where I posted that Car Pro says don't apply reload on top of a wax? As you know Speed has Poxy in it. I'm thinking they say this for reasons of bonding to the paint vs bonding to the wax which would most likely effect longevity. Make sense? I'm just thinking off the cuff on this.
I saw that in this thread, bud didn't know that before. It is ok on a sealant though? (Yes I know HD speed isn't really just a sealant). Would reload top say Wolfgang deep gloss 3.0?
-
Super Member
Re: Top HD Speed with...
Originally Posted by Coopers ST
I saw that in this thread, bud didn't know that before. It is ok on a sealant though? (Yes I know HD speed isn't really just a sealant). Would reload top say Wolfgang deep gloss 3.0?
why would you want to top a sealant with another sealant?
-
Super Member
Re: Top HD Speed with...
Originally Posted by Coopers ST
I saw that in this thread, bud didn't know that before. It is ok on a sealant though? (Yes I know HD speed isn't really just a sealant). Would reload top say Wolfgang deep gloss 3.0?
I have a bottle of Reload and haven't gotten around to using it yet. I'd refer to to what they say here about their product.
Reload Spray Sealant, spray paint sealant, spray wax, CQuartz Reload
2013 Genesis Coupe 3.8 Track Edition
2015 Hyundai Sonata Limited, 2016 Pearl White Nissan Altima SR
2019 Nissan Rogue SL
-
Re: Top HD Speed with...
I've read a couple reports on here of guys using Menz Powerlock over Speed with good results.
Similar Threads
-
By AllenK in forum Auto Detailing 101
Replies: 8
Last Post: 07-29-2018, 12:25 PM
-
By RandyD in forum Auto Detailing 101
Replies: 3
Last Post: 07-22-2018, 07:00 PM
-
By lj993 in forum Product Reviews
Replies: 10
Last Post: 05-22-2017, 11:30 PM
-
By cleanfreak3 in forum Tricks, Tips and Techniques
Replies: 15
Last Post: 03-12-2016, 01:05 AM
-
By Garry Dean in forum Tricks, Tips and Techniques
Replies: 13
Last Post: 01-10-2012, 12:58 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks