Uber rinseless - Presoak or not to Presoak. How do you use it?

[emmjay]

Hello,

Using ONR all this while as rinseless. I am of the pool that uses ONR at QD ratio as a presoak before using the Garry Dean method to rinseless wash my car. (3 oz per 2 gallons as I just want to be safe).

I then follow with a spritz of ONR at QD ratio while drying as a drying aid and to avoid any marring.

Honda paint is way too soft for my liking.

Is there a similar method to use Uber Rinseless? By that I mean, pre-soak, followed by wash media (8 towels) and then followed by damp Purple Plush with a spritz of Solution, flip over to dry to a high shine.


How do you use Uber Rinseless?

[cleanmycorolla]

its the same way as any other rinseless no need to change process

[emmjay]

its the same way as any other rinseless no need to change process

True. But just to confirm as its night here and Im beat from work....Sun - Thurs in my country.

QD Presoak. Wash solution..wash. QD spritz to dry yes?

My other option would be 1 oz per 3 gallons. I only use 2 gallons so I could use the remaining 1 gal in a pump sprayer as my presoak.

Thank you.

We are rather active today haha.

[usmcpab]

My other option would be 1 oz per 3 gallons. I only use 2 gallons so I could use the remaining 1 gal in a pump sprayer as my presoak.

Thank you.

We are rather active today haha.[/QUOTE]

This is basically how I perform rinseless wash with Wolfgang uber.

[Chloe92us]

I typically do a pre-soak spray followed by rinseless as well. But I dry with a spray wax instead of the QD. I feel the extra step of pre soaking the car helps but it may be all in my head. The products were designed to work without doing that so it's probably excessive. I use ONR, Uber (thanks Ron!), or Ultima. I've recently been dabbling in waterless washing as well, and have to say it looks awesome when I do....

[emmjay]

Awesome, thanks guys. Uber is a lot more expensive and comes in a tiny bottle so I dont want to waste it if not needed.

[pheerix]

The presoak isn't that crucial as long as you have something there that lubricates and breaks up the dirt a little. I've used ONR, Opti-Clean, D114, Spray and Wipe, even plain water from a quick hose down before Rinseless with Uber and they've all been fine.

[emmjay]

The presoak isn't that crucial as long as you have something there that lubricates and breaks up the dirt a little. I've used ONR, Opti-Clean, D114, Spray and Wipe, even plain water from a quick hose down before Rinseless with Uber and they've all been fine.

Thanks Pheerix. My Honda paint is quite soft, so I try to be (read am) quite AR haha.

[chet31]

I use ONR, make 2 gallons, one gallon into a garden sprayer for pre-soak, one for my microfibers (Garry Dean method). Pre-soaking takes so little time and effort, I think it makes things slicker. No need to use QD strength for pre-soak IMO. Also, drying car using QD spray is overkill, the surface is clean and there is already ONR on the surface.

[Jomax]

I do the Garry dean method, and use a two gallon garden sprayer to pre soak. It's SOO easy to pre soak. I just do it, and I know for a fact that it makes RW more safe, especially on black paint. I used to use d156 as a drying aid with ONRW. But with WG uber. I see no need. It leaves the paint SLICK.