Thanks: 0
Likes: 0
Dislikes: 0
-
Re: Using a Glaze
Originally Posted by Mike.Phillips@Autogeek
Yes that is the recommended protocol from every coating manufacturer that I'm aware of. The idea being the coating needs an ABSOLUTELY clean surface in order to form a proper bond.
This means removing any of the polishing oils and any other substance used in compounds, polishes and paint cleaners.
Yes.
I've written a new book that deals with this topic that is not published yet. What I say, show and practice myself is to wipe the car down TWICE after using the Cleansing Polish because you want to make sure that all the trace residues from this product and process are removed before applying a coating.
Kind of like when a painter paints a car the most important aspect or factor besides doing the proper body work is to properly prepare the surface for the primer and then the paint otherwise there will be issues with surface adhesion.
So take your time and go around the car twice using clean, soft microfiber towels and wipe each square inch of each panel complete clean before applying the coating.
You're reading correctly.
I think I misunderstood the order you were going to use and I though you were going to use a glaze or paint cleaner last and then apply the coating and this would be incorrect.
The last step before applying any coating is to chemically strip the paint in some fashion.
Thanks Mike....I really appreciate your timely response and help. I'm now totally clear on what I'm doing and ready to get the task completed.
-
Super Member
Re: Using a Glaze
I don't want to extend the discussion to introduce any more confusion here on this topic but i am also looking at the PBL coating product and would like to fully understand the cleansing polish function. I believe we are all clear on not glazing but as far as finish steps...
The OP initially said he was about halfway through his correction phase enroute to the final LSP. After M105, i ALWAYS need a refinement step that is abrasive (mildly speaking). My favorite is also Menz 4500. Ok, lets say i am now happy with the gloss, depth of finish etc. after 4500. Do i now use Eraser and coat or does the PBL final cleansing polish replace Eraser? Basically, does the PBL Cleansing Polish follow Menz 4500 for any compatability factors with the coating?
Again, gang, sorry for any more confusion here but just trying to understand the exact and preferred steps for PBL coating. Let me offer it this way:
A.
1. Correction (full and down to refined finish)
2. Eraser (or any method you want for removing oils, carriers etc.)
3. pBL coating
B
1. Full correction (M105, Menz 4500)
2. PBL Surface Cleansing Polish
3. PBL Coating
C
1. Full correction (M105, Menz 4500)
2. PBL Cleansing Polish
3. Eraser (or your preferred paint cleaner)
4. Coating
Or D, something else. I think i'm reading here Option A is best. As Mike said above, the PBL Cleanser is redundant over Menz SF4500?
My intent is to completely understand the final prep step to promote the best bond of the coating and thus maximize durability.
-
Regular Member
Re: Using a Glaze
For what it's worth, I've had my PBL Surface coating on for over 6 months and waxes and sealants don't stick to it very easy yet. ( I try a spot now and then for fun).
-
Super Member
Re: Using a Glaze
Originally Posted by Puckman
I don't want to extend the discussion to introduce any more confusion here on this topic but i am also looking at the PBL coating product and would like to fully understand the cleansing polish function. I believe we are all clear on not glazing but as far as finish steps...
The OP initially said he was about halfway through his correction phase enroute to the final LSP. After M105, i ALWAYS need a refinement step that is abrasive (mildly speaking). My favorite is also Menz 4500. Ok, lets say i am now happy with the gloss, depth of finish etc. after 4500. Do i now use Eraser and coat or does the PBL final cleansing polish replace Eraser? Basically, does the PBL Cleansing Polish follow Menz 4500 for any compatability factors with the coating?
Again, gang, sorry for any more confusion here but just trying to understand the exact and preferred steps for PBL coating. Let me offer it this way:
A.
1. Correction (full and down to refined finish)
2. Eraser (or any method you want for removing oils, carriers etc.)
3. pBL coating
B
1. Full correction (M105, Menz 4500)
2. PBL Surface Cleansing Polish
3. PBL Coating
C
1. Full correction (M105, Menz 4500)
2. PBL Cleansing Polish
3. Eraser (or your preferred paint cleaner)
4. Coating
Or D, something else. I think i'm reading here Option A is best. As Mike said above, the PBL Cleanser is redundant over Menz SF4500?
My intent is to completely understand the final prep step to promote the best bond of the coating and thus maximize durability.
A or B would work. Eraser and the cleansing polish do the same thing.
-
Super Member
Re: Using a Glaze
Thanks stangfan, that's what i was thinking but just wanted to clarify with some of you folks more experienced. I gathered that from reading through this thread but inhaling silica dust for so many years has possibly adjusted my cognitive abilities a bit!
I do like "family" compatability and might prefer option B however i do like the performance of Eraser and knowing it has done its job. I guess i was just leery of what PBL Cleanser left behind. At least we know 1.) glazes are useless here and 2.) Eraser/iso alc wipes are redundant to PBL Surface Cleansing Polish.
Thanks again for clarifying.
Similar Threads
-
By KirkH in forum Show N' Shine
Replies: 6
Last Post: 09-07-2017, 08:30 PM
-
By ScottH in forum Ask your detailing questions!
Replies: 9
Last Post: 08-17-2017, 05:31 PM
-
By TroyM in forum Auto Detailing 101
Replies: 15
Last Post: 03-14-2013, 03:05 PM
-
By Mike Phillips in forum How to articles
Replies: 8
Last Post: 12-12-2012, 09:46 AM
-
By sportscarhiatus in forum Auto Detailing 101
Replies: 10
Last Post: 02-21-2011, 11:20 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
26 | 27 | 28 | 29 | 30 | 31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 | 5 | 6 |
|
Bookmarks