Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Originally Posted by Setec Astronomy
Thanks for that additional info. In the old days I would have been "cool! vintage tires!" but I seem to be getting more conservative and a little chicken &%@# in my old age.
We have a 59 Chrysler 300 E, being I chicago it sits more than it's driven. The car had new bias plys put on it when it was restored 20+ years ago. Every year the same tire would be flat after winter storage, every year for about 5 years we would refill it. It was such a slow leak that it would not lose enough pressure during the classic car season.
The tires looked great, but finally at sustained speeds of 70 for 3 + hours on a trip to ohio it started to throw chunks of rubber. The tire never went flat, we pulled into a gas station and put on the spare.
We now have WW radials on it. It all depends on use.
-
Junior Member
-
Re: Antique tires
Originally Posted by geekdout
Even if you say you are just using it for shows at some point you are going to be driving around town on them. I don't think it comes down to if they will fail but when they will fail.
You can get just about anything from Coker Tire.
Coker tire makes vintage looking wide whitewalls. Almost identical to originals. The rubber compounds have come a long way over the years, so new tires have much better rubber than 50 year old tires.
-
Re: Antique tires
Originally Posted by Blackthorn One
Coker tire makes vintage looking wide whitewalls. Almost identical to originals. The rubber compounds have come a long way over the years, so new tires have much better rubber than 50 year old tires.
That is what I was going to bring up. I mean is it just me... has nobody else heard of Corky Coker? You'd be hard pressed to find a tire for a vintage, or Antique vehicle that Coker Tire doesn't have. They have even bought up old (and long discontinued) tire molds from factories from around the world! You can even get "vintage" looking tire that has been built with modern radial technology.
-
Re: Antique tires
Originally Posted by cardaddy
That is what I was going to bring up. I mean is it just me... has nobody else heard of Corky Coker? You'd be hard pressed to find a tire for a vintage, or Antique vehicle that Coker Tire doesn't have. They have even bought up old (and long discontinued) tire molds from factories from around the world! You can even get "vintage" looking tire that has been built with modern radial technology.
I've heard it said that the most significant improvement in automotive performance is tires.
Overlooked, but with modern tires, your 67 L88 Corvette will be performing way better than it ever did when new.
-
Re: Antique tires
Originally Posted by Blackthorn One
I've heard it said that the most significant improvement in automotive performance is tires.
Overlooked, but with modern tires, your 67 L88 Corvette will be performing way better than it ever did when new.
Here here!
I grew up in those bias ply days, and OMG were cars easy to break loose once you put a little power behind them.
Several cars I had back in the 70's, (including Mercury Comet (2 actually), Chevy (Chevelle, Camaro & Corvette), GTO (both 67, then later 73), even a Plymouth Fury 440 and a Javelin all had bias tires on them. The first Comet was a 2-bolt main with a few bolt on power adders and I wrapped it around a telephone pole, right in the drivers door! (Because the tires broke loose.) The second Comet was a 4-bolt main, built out the arse, (would pull the front wheels off the ground) and IT was on bias tires.
But by FAR... the scariest car I ever drove was probably that Javelin with stock 70 series tires on it. That one was a 425HP 401 with a slap stick auto, Dana posi-loc rear end and it'd smoke those skinny tires from a standing stop until you either stopped, or let off the gas. Could be going 40 and slap it in first and it'd go all sideways all the way till you got midway through third. Going 55 and hit second and it'd do the same darned thing. That big honking Fury (2 door car) swapped ends with me once doing about 90 on a country road and backed through the woods doing about 60!
Put radials on any of those cars and they would be totally different, TOTALLY different. First thing I did to my Vette after I bought it was get rid of the stupid bias ply tires! Made that puppy ride & drive like a dream.
-
Junior Member
Re: Antique tires
how did a "how to clean and treat" nos bias belt tires morph into bias vs radials ? no one would argue that radials are a big handling-riding improvement over Bias belt tires.
The point is that these are origanil made in the 50's tires that I want to use as display in antique car shows for period authenticity.
(by the way, one of my favorite all time cars are the AMC AMX 401's)
-
Re: Antique tires
Originally Posted by cardaddy
I grew up in those bias ply days, and OMG were cars easy to break loose once you put a little power behind them.
Weren't those the fun days!?! Damn the torpedoes, full speed ahead!
Bill
In dog beers, I've only had one.
-
Junior Member
Re: Antique tires
Well, here are the results--
670 X 15 NOS Tires Photos by studebaker2 | Photobucket
I washed all 4 tires with Oxywash and they were still not really clean. Then my Autogeek shipment came in and I used the Pinnacle Signature all purpose cleaner to clean them again. Very noticeable difference. This product really cleaned with one application.
Dried tires and then tried the Blackfire Total Trim # Tire Sealant. Really liked this product, gave a dryer look but real nice.
Then tried the Pinnacle Black Onyx Tire Gel, much wetter look. I wound up using this on all four tires as I felt like the Gel would creep into the sidewall better over time as I wrapped and stored the tires.
In the photo album, notice one tire white wall is lighter than the other-- That lighter one is with the Blackfire applied. I will use it on my newer tires.
-
Super Member
It is amazing that 50 plus year-old tires look that good. Thank you for sharing.
Similar Threads
-
By Mike Phillips in forum How to articles
Replies: 2
Last Post: 12-17-2019, 05:26 PM
-
By Mike Phillips in forum Car Detailing History - Vintage and antique car waxes and buffing tools
Replies: 18
Last Post: 11-13-2019, 08:12 PM
-
By Mike Phillips in forum Off-Topic
Replies: 22
Last Post: 06-04-2012, 12:53 PM
-
By Mike Phillips in forum Car Detailing History - Vintage and antique car waxes and buffing tools
Replies: 35
Last Post: 12-07-2011, 08:04 PM
-
By richy in forum Off-Topic
Replies: 4
Last Post: 12-06-2007, 11:56 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks