autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Newbie Member
    Join Date
    May 2014
    Posts
    2
    Post Thanks / Like

    Wolfgant Sealant after a layer of wax?

    I recently ran into an issue with the Wolfgang Deep gloss Sealant:

    After spending a long day with prep work getting all of the swirls out using the Wolfgang products (swirl remover & glaze), when it came to putting the sealant on I noticed that the liquid and oil had separated, no matter how much I shaked bottle they continued to be separated. I haven't used the product for 6 months but it was stored in room temp; I guess it had gone bad. So I put a layer of Pinnacle Souveran on but I would really like to put the sealant. I have ordered a new bottle of sealant, my question is can I put it directly on the wax or do I need to remove the wax first? do I need to redo the glaze again?

    Thanks in advance!

  2. #2
    Super Member 281's Avatar
    Join Date
    May 2013
    Location
    The City
    Posts
    2,440
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    Remove the the wax first. No need for WG finishing glaze...

  3. #3
    Super Member lkotsios's Avatar
    Join Date
    Aug 2009
    Location
    Chicago burbs
    Posts
    469
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    You can put it over the wax, I do it all the time on my car. Those type of sealants are like 12% mineral spirits they will cut right through the wax no problem.

  4. #4
    Super Member FUNX650's Avatar
    Join Date
    Dec 2010
    Location
    Ohio, USA
    Posts
    21,057
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    Quote Originally Posted by lkotsios View Post
    You can put it over the wax, I do it all the time on my car. Those type of sealants are like 12% mineral spirits they will cut right through the wax no problem.
    Interesting. (Both the 12% mineral spirits; and cut right through wax observations.)

    But...Where does the Wax go?
    -Is it all removed at the same time when wiping-off WGDGPS' "haze"?
    -Commingles with WGDGPS?
    -None of the above.
    -OK...then: Other?

    Thanks.

    Bob
    "Be wary of the man who urges an action in which he himself incurs no risk."
    ~Joaquin de Setanti

  5. #5
    Super Member lkotsios's Avatar
    Join Date
    Aug 2009
    Location
    Chicago burbs
    Posts
    469
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    My guess would be that it is removed with the haze and some comingles. Refined mineral spirits is common to many of these lsp's, so I wouldn't get to hung up over wax over sealant or sealant over wax. MSDS sheet for four star upp list mineral spirits at 12% if I remember correctly and in my opinion four star is probably the manufacturer of auto geeks house brand sealants, thus 12% is my estimate for wolfgang sealant.

  6. #6
    Super Member mwoolfso's Avatar
    Join Date
    Jul 2011
    Location
    Long Island, NY
    Posts
    2,592
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    For all practical purposes the wax layer will be compromised and will mix somewhat with the sealant. Certainly some of this "mixture" will come off when you wipe with a microfiber but essentially you are going to have a hybrid sealant/wax LSP that won't last very long. My guess is less than 8 weeks but that is just a gut response.

    As to the original bottle that won't combine.... as a last-ditch-effort I would put a stirrer of some sort to the bottom of the bottle and see if any accumulation of product is simply settled. Mix that up a little with the stirrer and then shake vigorously on and off for a day. You may or may not see progress. Worst case is you get a really good workout on your arms.

  7. #7
    Super Member FUNX650's Avatar
    Join Date
    Dec 2010
    Location
    Ohio, USA
    Posts
    21,057
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    Quote Originally Posted by lkotsios View Post
    My guess would be that it is removed with the haze and some comingles. Refined mineral spirits is common to many of these lsp's, so I wouldn't get to hung up over wax over sealant or sealant over wax. MSDS sheet for four star upp list mineral spirits at 12% if I remember correctly and

    in my opinion four star is probably the manufacturer of auto geeks house brand sealants,

    thus 12% is my estimate for wolfgang sealant.
    Isn't 4* one of Premium Finish Care's "house brands"?

    Bob
    "Be wary of the man who urges an action in which he himself incurs no risk."
    ~Joaquin de Setanti

  8. #8
    Super Member lkotsios's Avatar
    Join Date
    Aug 2009
    Location
    Chicago burbs
    Posts
    469
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    Premium finish care has their on manufacturing facilities making their own house brands including 4 star. Auto geek has their own house brands manufactured by premium finish care. In other words auto geek re labels. Just my opinion of course. try getting an msds for auto geeks sealants, next to impossible hmmm, I wonder why?

  9. #9
    Super Member FUNX650's Avatar
    Join Date
    Dec 2010
    Location
    Ohio, USA
    Posts
    21,057
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    Quote Originally Posted by lkotsios View Post
    Premium finish care has their on manufacturing facilities making their own house brands including 4 star.

    Auto geek has their own house brands manufactured by premium finish care.

    In other words auto geek re labels. Just my opinion of course.

    try getting an msds for auto geeks sealants, next to impossible hmmm, I wonder why?
    Recently...
    Some people are even saying that DuraGloss (Brothers Research) manufactures AutoGeek's Pinnacle Black Label's Paint Coating...

    "OH! What a tangled web we weave..."

    Bob
    "Be wary of the man who urges an action in which he himself incurs no risk."
    ~Joaquin de Setanti

  10. #10
    Super Member cleanmycorolla's Avatar
    Join Date
    Apr 2012
    Location
    Pasadena, CA
    Posts
    3,805
    Post Thanks / Like

    Re: Wolfgant Sealant after a layer of wax?

    BTW, I dont think your bottle went bad. It should last years. You just need to shake it like you've never shook it before. I have a 3 year old bottle of Wolfgang, once I shake the hell out of it, it is fine again. Just have patience and shake, no need for another bottle.
    Back to the full-time grind.

Page 1 of 2 12 LastLast

Similar Threads

  1. Layer Collinite #845 over a sealant??
    By DARK HORSE in forum Auto Detailing 101
    Replies: 39
    Last Post: 11-26-2018, 06:11 PM
  2. Klasse Sealant Glaze - Yet another layer
    By Don M in forum Show N' Shine
    Replies: 1
    Last Post: 09-03-2018, 07:25 PM
  3. Adding a layer of sealant
    By zm1283 in forum Auto Detailing 101
    Replies: 2
    Last Post: 06-04-2013, 04:41 PM
  4. Wolfgant Paint Sealant, Fuzion, and Megs UQW
    By mcpp66 in forum Ask your detailing questions!
    Replies: 12
    Last Post: 02-09-2010, 12:11 AM
  5. Layer a Sealant?
    By stealth in forum Auto Detailing 101
    Replies: 3
    Last Post: 06-17-2008, 06:13 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» April 2024

S M T W T F S
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 1234