Thanks: 0
Likes: 0
Dislikes: 0
-
Evansville, Indiana - Going to be in town in October
Evansville, Indiana - Going to be in town in October
It's that time of year again and Max and I are going to be in Evansville, Indiana to film brand new shows for My Classic Car with Dennis Gage.
I'm looking for a few cars for the show, I'll post details on Monday. So bookmark or subscribe to this thread if you're in the Evansville area.
Basically I'll be looking for at least two classics or street rods to have on the set as eye candy as well as demonstrate on. Just to note, in the last three years all the cars we've used on the set there's never been any problems and in fact, just the opposite.
Last year when I was in a town I held a mini detailing class at Scott Molden's shop and we had a huge turn out PLUS the man himself, Dennis Gage, attended and hung out with us for over an hour and talked shop and signed autographs. So for those of you that attended, good job. For those that could have and didn't... well if you snooze you lose...
I don't think there will be time for a detailing GTG this year as our schedule is very tight, there will be time for a meet & greet however like we hold on here in Stuart after the Saturday Detailing Boot Camp Class.
Here's some pictures from last year....
Pictures with Dennis Gage at the Evansville Detailing Class
Evansville GTG
More pictures here ...
We're also going to have the option to have a modern car on the show, it's going to need to have easily visible black plastic trim that is weathered but not so far gone that it cannot be saved.
Anyway, just a heads up. I'm looking for some cars and I'll be contacting some of my regular contacts in the area to see if they have a car or know of a car.
This will be Autogeek's 4th year on My Classic Car as the Title Sponsor and this year will be bigger and better than ever!
-
Re: Evansville, Indiana - Going to be in town in October
Wow! This is going to be good. Gonna have to keep my eye out for this.
-
Re: Evansville, Indiana - Going to be in town in October
Originally Posted by Mike.Phillips@Autogeek
We're also going to have the option to have a modern car on the show, it's going to need to have easily visible black plastic trim that is weathered but not so far gone that it cannot be saved.
Hmm...that almost sounds like a trim restorer product is on its way from PBMG...
-
Re: Evansville, Indiana - Going to be in town in October
Mike,
The little short guy (ha ha) standing directly to your left in that photo is the guy to get in contact with. He's in TN at the moment at the Frog Follies show, but will be back soon.
I just spoke with him on the phone and told him about this thread, but he's sort of preoccupied at the moment with the show and that's understandable. Something to do with not being able to hear me too well with all the noise. Huh! Noise at a car show...go figure. LOL!!!
-
Super Member
Re: Evansville, Indiana - Going to be in town in October
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Re: Evansville, Indiana - Going to be in town in October
-
Re: Evansville, Indiana - Going to be in town in October
Jordan Young, a friend on my Facebook page has offered these,
- 1991 Trans Am
- 1993 BMW 850CI
- 1995 NSX
Here's the Trans Am...
Jordan attended the Evansville, Indiana Class I taught in the picture in the first post of this thread. Thanks Jordan!
Any car on the set has to be approved by management at both Madstache and Autogeek, I'm more or less the guy in charge of rounding up some choices.
-
Super Member
Re: Evansville, Indiana - Going to be in town in October
Mike, Not a problem I hope our schedules line up. Full disclosure for everyone on the forum. I work for Gold Eagle Who recently acquired 303 Products . I was an avid user of the product before hand for the Mustang and White 300H's convertible top and interiors, along with the fabric guard for my friends Chrysler Town and Country Convertible and our classic boats. 303 is what brought me to the Auto Geek forum looking for a place to buy 303. Since then I've been on the forum as a hobbyist learning about high quality waxes and proper techniques prior to Gold Eagle's involvement with 303.
Gold Eagles mainly manufactures automotive chemicals. STA-BIL fuel stabilizer, HEET gas line antifreeze, Octane 104 Octane Boost, and many others.
-
Super Member
Re: Evansville, Indiana - Going to be in town in October
Mike,
First off glad to see your coming back to Evansville! Last's years detailing night was a blast. I'm from the local area and know several guys with some pretty awesome rides! I will make some calls and shoot some messages and see if I can't come up with something!
Keep Calm... and Detail On!
Eric
-
Re: Evansville, Indiana - Going to be in town in October
Originally Posted by MPBGT
Mike, Not a problem I hope our schedules line up. Full disclosure for everyone on the forum. I work for Gold Eagle Who recently acquired 303 Products . I was an avid user of the product before hand for the Mustang and White 300H's convertible top and interiors, along with the fabric guard for my friends Chrysler Town and Country Convertible and our classic boats.
303 is what brought me to the Auto Geek forum looking for a place to buy 303. Since then I've been on the forum as a hobbyist learning about high quality waxes and proper techniques prior to Gold Eagle's involvement with 303.
Thank you for chiming in and adding that...
Originally Posted by EWtheDETAILER
Mike,
First off glad to see your coming back to Evansville! Last's years detailing night was a blast.
I'm from the local area and know several guys with some pretty awesome rides! I will make some calls and shoot some messages and see if I can't come up with something!
Cool. Good to hear. Please keep me posted...
Similar Threads
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 4
Last Post: 09-25-2017, 12:58 PM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 24
Last Post: 10-16-2014, 10:23 PM
-
By Mike Phillips in forum Off-Topic
Replies: 71
Last Post: 10-17-2012, 05:07 PM
-
By BlantonDetail in forum Introduce Yourself
Replies: 13
Last Post: 08-29-2011, 07:49 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks