Dislikes: 0
-
Junior Member
Wheel ceramic affect wheel weights?
Nearly ready to apply Gtechniq C5 to the rims. Saw comments on sites about weights not adhering as well; I guess on the inside of the barrel.
Anyone heard of this? Someone said let the coating cure for at least 5 days.
-
Re: Wheel ceramic affect wheel weights?
When I use Opti-Coat 2.0 on wheels, I've never had any weight issues. However, OC 2.0 was not a slick coating, more like bare paint. I know DFB cautioned about the Armour wheel coating being too slick for weights; I've never used it but hard for me to imagine that double stick tape not holding.
-
Re: Wheel ceramic affect wheel weights?
I've had concerns but sofar....I've yet to find a missing weight. VHB or any decent weight supplier should -fuse- to the substate it's being attached.
Now that I'm putting this into perspective, I've be more concerned about a tire shop with cheap stick on weight.
Every now and then , you do see a thread where the VHB is kinda there, somewhat there but the weight is completely gone.
-
Super Member
Re: Wheel ceramic affect wheel weights?
Originally Posted by raysaint
Nearly ready to apply Gtechniq C5 to the rims. Saw comments on sites about weights not adhering as well; I guess on the inside of the barrel.
Anyone heard of this? Someone said let the coating cure for at least 5 days.
I tend to have the tyres mounted and balanced before coating. This does make manhandling the wheels while coating more difficult, but I would rather deal with that than having something not go right with a functional part of the wheel. That said, I can't say for sure that wheel weights wouldn't adhere to a coating, I would assume that would vary depending on the adhesive used and the coating itself.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Wheel ceramic affect wheel weights?
Originally Posted by DFB
I tend to have the tyres mounted and balanced before coating. This does make manhandling the wheels while coating more difficult, but I would rather deal with that than having something not go right with a functional part of the wheel. That said, I can't say for sure that wheel weights wouldn't adhere to a coating, I would assume that would vary depending on the adhesive used and the coating itself.
Agreed
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
DFB thanked for this post
-
Junior Member
Re: Wheel ceramic affect wheel weights?
I'll talk with the tire shop today, and see what he says. Maybe they only use the clip-on weights, along the edge of the rim. If I have to I'll have them mounted and then coat them before the install.
I might go ahead and coat the face of the rims, then the barrels after mount and balance
Thanks for the insight.
-
Super Member
Re: Wheel ceramic affect wheel weights?
Originally Posted by raysaint
Maybe they only use the clip-on weights, along the edge of the rim.
Do tire shops even use clip on weights for non-commercial vehicles any more? I can't say I've seen a clip on weights anywhere for a very, very long time. Many of the wheel designs don't really lend themselves to a having a good place to apply the clip.
-
Junior Member
Re: Wheel ceramic affect wheel weights?
Originally Posted by Desertnate
Do tire shops even use clip on weights for non-commercial vehicles any more? I can't say I've seen a clip on weights anywhere for a very, very long time. Many of the wheel designs don't really lend themselves to a having a good place to apply the clip.
Upon a closer look, there are a bunch of adhesive weights in a row on the inside of the barrel, close to the front of the rim. And there's one clip-on on the rear edge of each rim.
Not sure if the dealership balanced them before pickup, or the factory. But with new rubber, chances are weights will have to be added or removed to balance them.
-
Re: Wheel ceramic affect wheel weights?
They generally pull all the old weights before mounting the new tire.
-
Re: Wheel ceramic affect wheel weights?
And for real OCD.....ahem....one preps the wheel before getting new tires installed (if you are fortunate enough to be using a different set of wheels physically on the car). It's my preferred way to get wheels mounted if the opportunity exists
It's alot easier to remove weight, then yellow rubber eraser off the VHB so the tire tech has a perfectly clean wheel to do his thing.....and if he's mounting it right after......the hard part is done. Removing leftover weight sticker after the fact with adhesive remove, plastic scraper, etc is more work that can be avoided if it was done off the car
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
DFB liked this post
Similar Threads
-
By chefwong in forum Auto Detailing 101
Replies: 0
Last Post: 12-07-2023, 03:26 PM
-
By chefwong in forum Ask your detailing questions!
Replies: 7
Last Post: 02-13-2023, 03:07 PM
-
By dgage in forum Auto Detailing 101
Replies: 16
Last Post: 09-08-2022, 03:46 PM
-
By BudgetPlan1 in forum Auto Detailing 101
Replies: 4
Last Post: 07-27-2016, 07:11 PM
-
By Kaban in forum Auto Detailing 101
Replies: 19
Last Post: 10-19-2012, 10:51 PM
Members who have read this thread: 24
- Rsurfer,
- chefwong,
- Karl_in_Chicago,
- bill walsh,
- Setec Astronomy,
- PA DETAILER,
- hoyt66,
- raysaint,
- vobro,
- TonesGTO,
- Azure,
- Desertnate,
- rmtaylor51,
- thedoc46,
- briarpatch,
- SNP209,
- Willbeen,
- DFB,
- msharpe785,
- dbeng,
- Thunderchicken,
- Forty,
- cb804,
- Optimus Grime
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
26 | 27 | 28 | 29 | 30 | 31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 | 5 | 6 |
|
Bookmarks