Wolfgang Uber Rinseless Wash (used as Waterless) vs Koch Chemie FSE (Finish Spray Exterior)

[craigdt]

Uber is one of my favorite for quick waterless wipe down.

[PeteT19640]

@rsurfer @coatingsarecrack @craigdt

The car is a Nissan Fuga (Infiniti) 2008 Y50 how much waterless wash would you say is a good amount to use?
I used about 1.5 litres is this ok?

[Rsurfer]

@rsurfer @coatingsarecrack @craigdt
I used about 1.5 litres is this ok?

You tell us..are you happy with the results?

[Coatingsarecrack]

@rsurfer @coatingsarecrack @craigdt

The car is a Nissan Fuga (Infiniti) 2008 Y50 how much waterless wash would you say is a good amount to use?
I used about 1.5 litres is this ok?

To be honest I don’t know. Have done 1 waterless 6 years ago.

I probably use 1liter as pre spray for a rinsless.


Sent from my iPhone using Tapatalk

[Eldorado2k]

@rsurfer @coatingsarecrack @craigdt

The car is a Nissan Fuga (Infiniti) 2008 Y50 how much waterless wash would you say is a good amount to use?
I used about 1.5 litres is this ok?

I’m currently on my 2nd gallon of Wolfgang Uber Rinseless Wash Concentrate and I’ve probably only done a rinseless with it maybe twice, so that should give you an idea of how much I’ve used it for waterless washing.

IMO 1.5L is the sweet spot when using it to waterless wash a moderate/dirty vehicle. That’s usually how much I use, almost a full 1.5L Kwazar Pump Sprayer full. You’re using it correctly.

[PeteT19640]

You tell us..are you happy with the results?

It seems to be ok.
Soaked the wipe cloth as well as the panel.
It was a bit grabby when wiping off, needed two wipes.

[PeteT19640]

To be honest I don’t know. Have done 1 waterless 6 years ago.

I probably use 1liter as pre spray for a rinsless.


Sent from my iPhone using Tapatalk

Ok so 1.5L sounds about right.

[PeteT19640]

I’m currently on my 2nd gallon of Wolfgang Uber Rinseless Wash Concentrate and I’ve probably only done a rinseless with it maybe twice, so that should give you an idea of how much I’ve used it for waterless washing.

IMO 1.5L is the sweet spot when using it to waterless wash a moderate/dirty vehicle. That’s usually how much I use, almost a full 1.5L Kwazar Pump Sprayer full. You’re using it correctly.

Thank you.
It was a bit grabby when initially wiping off but 2nd wipe seemed to be ok.
I sprayed the towels and sprayed the panels with Uber.
Is it my technique maybe?

[Eldorado2k]

Thank you.
It was a bit grabby when initially wiping off but 2nd wipe seemed to be ok.
I sprayed the towels and sprayed the panels with Uber.
Is it my technique maybe?

My 1st thought is what condition is your paint in? Are you waterless washing a vehicle that’s been properly clayed & protected? If so the waterless washing experience should be pretty smooth.

The only time the experience is “grabby” is when attempting to waterless wash a vehicle with paint that’s not smooth [aka hasn’t been clayed & protected]

If your vehicle is for example coated, and you sprayed that amount of Uber on the panel the wipe should be rather smooth and not something I’d describe as grabby even though we all have different ways of describing things.

Edit: I just read your OP and see that your vehicle is ceramic coated and you’re attempting to clean off light dust. Based on that and you sayijg you use an average of 1.5L of Uber Rinseless diluted @1oz. per gallon I’m having a hard time with it being described as “grabby”. Interesting.

[Eldorado2k]

FSE is more acidic food for light water spots.

What??^

Ok, now I’m curious as to what this product even is.