autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Page 1 of 3 123 LastLast
Results 1 to 10 of 28
  1. #1
    Regular Member queens guy's Avatar
    Join Date
    Jun 2013
    Posts
    102
    Post Thanks / Like

    Question on detailing finishing product

    It's been a long time since i have done a full detail. I am looking for recommendations on a product to use other than a ceramic coating. Car is 2022 Volvo XC60 paint is ok but had a lot of etching from bird poop and rain as it sits outside. Also need to paint correct since wife goes to car wash once a week so have a soon of everything on the paint. Here are my steps below:

    Soak
    Wash
    Clay
    Meguiar's Compound 105
    Meguiar's Polish 205
    Ipa Wipe down

    After IPA wipe down, do I need to put on some detailing spray wax or something since i already used the Meguiar's Polish 205 ?? If so then what you recommend?

  2. #2
    Super Member PouncingPanzer's Avatar
    Join Date
    May 2017
    Location
    Cleveland
    Posts
    901
    Post Thanks / Like

    Re: Question on detailing finishing product

    Collinite 476 has been my favorite finishing product for a year or so now. I volunteer at the USS Cod and bird bombs by the gulls are frequent. CQuartz didn't stand up to the bombings and I had etching on the roof of my GTI and GLI. But the 476 hasn't failed me yet. Besides, I am partial to wax gloss over coating shine. The 476 has more luster than the CQuartz UK did.
    2019 GLI 35th Edition DSG in Pure Grey w/ OEM+ IS38 turbocharger and various bolt-ons.

  3. Likes opie, PaulMys, queens guy, dlc95 liked this post
  4. #3
    Super Member 2black1s's Avatar
    Join Date
    Jan 2015
    Location
    Simi Valley, CA
    Posts
    1,783
    Post Thanks / Like

    Re: Question on detailing finishing product

    Skip the IPA wipe as it is totally unnecessary. Then apply some form of protection as the 205 will not provide any protection. Meguiar's Ultimate Wax would be a good choice. Everything else with your process looks ok.

  5. Likes queens guy, dlc95 liked this post
  6. #4
    Super Member Desertnate's Avatar
    Join Date
    Aug 2013
    Location
    St Louis metro (Illinois)
    Posts
    5,809
    Post Thanks / Like

    Re: Question on detailing finishing product

    Agree on the IPA and 205 comments.

    If you are looking for a non-coating that acts a lot like one, Wolfgang's SiO2 Paint sealant is a great option. Easy to apply, looks good, and very durable. When I don't apply a coating, it's my go-to sealant.
    Drop by to see the latest at The Car Geek Blog

  7. #5
    Super Member briarpatch's Avatar
    Join Date
    Sep 2015
    Posts
    2,173
    Post Thanks / Like

    Re: Question on detailing finishing product

    Quote Originally Posted by Desertnate View Post
    If you are looking for a non-coating that acts a lot like one, Wolfgang's SiO2 Paint sealant is a great option. Easy to apply, looks good, and very durable. When I don't apply a coating, it's my go-to sealant.
    An excellent suggestion. You might also want to consider Jescar Ultra Lock Plus. I've used the Wolfgang Deep Gloss SIO2 version and Ultra Lock Plus. Both were super easy to use, glossy, slick and durable. I believe you'd be happy with either one.

  8. Likes queens guy, dlc95 liked this post
  9. #6
    Super Member PaulMys's Avatar
    Join Date
    Jan 2014
    Location
    Eastern L.I. NY
    Posts
    10,773
    Post Thanks / Like

    Re: Question on detailing finishing product

    I'll put 476S up against the WG Si02 or Jescar for bird bomb protection any day of the week.
    It is no coincidence that man's best friend cannot talk.

  10. Likes PouncingPanzer liked this post
  11. #7
    Regular Member queens guy's Avatar
    Join Date
    Jun 2013
    Posts
    102
    Post Thanks / Like

    Re: Question on detailing finishing product

    thanks for the feedback. So i have been doing some research.. Can someone tell me would in my case a graphene or ceramic coat be best that will hold better in daily driver and outdoors than a sealant?

    I was looking at the following:

    CARPRO | Cquartz UK 3.0 Edition
    Turtle Wax Hybrid Solutions Ceramic Coating
    Meguiars Ceramic Wax
    Adam’s Graphene
    303 Graphene
    Turtle Wax Seal N Shine
    Jescar Ultra Lock +

  12. #8
    Super Member Coatingsarecrack's Avatar
    Join Date
    Dec 2018
    Posts
    7,177
    Post Thanks / Like

    Re: Question on detailing finishing product

    Quote Originally Posted by queens guy View Post
    thanks for the feedback. So i have been doing some research.. Can someone tell me would in my case a graphene or ceramic coat be best that will hold better in daily driver and outdoors than a sealant?

    I was looking at the following:

    CARPRO | Cquartz UK 3.0 Edition
    Turtle Wax Hybrid Solutions Ceramic Coating
    Meguiars Ceramic Wax
    Adam’s Graphene
    303 Graphene
    Turtle Wax Seal N Shine
    Jescar Ultra Lock +
    Car pro 3.0 is only true coatings. Rest are just sealants (some good) with fancy names if I was not going coating I would try the wolfgang sio2 sealant. Heard nothing but good things.

    Out of your list minus the Cquartz Adam’s spray graphene advanced is probably strongest


    Sent from my iPhone using Tapatalk

  13. Likes Desertnate, dlc95 liked this post
  14. #9
    Super Member Desertnate's Avatar
    Join Date
    Aug 2013
    Location
    St Louis metro (Illinois)
    Posts
    5,809
    Post Thanks / Like

    Re: Question on detailing finishing product

    Quote Originally Posted by PaulMys View Post
    I'll put 476S up against the WG Si02 or Jescar for bird bomb protection any day of the week.
    I've never had bird droppings eat through any LSP, sealant or coating, as long as I cleaned it up within a day-ish of being deposited. If you're using a quality product it should provide a pretty good defense until you can remove the material left behind from an aerial bombardment.
    Drop by to see the latest at The Car Geek Blog

  15. Likes Coatingsarecrack liked this post
  16. #10
    Super Member dlc95's Avatar
    Join Date
    May 2013
    Location
    Rochester Hills, Mi
    Posts
    6,016
    Post Thanks / Like

    Re: Question on detailing finishing product

    Quote Originally Posted by 2black1s View Post
    Skip the IPA wipe as it is totally unnecessary. Then apply some form of protection as the 205 will not provide any protection. Meguiar's Ultimate Wax would be a good choice. Everything else with your process looks ok.
    Right.

    You only need a panel wipe if the wax, sealant, or coating says to do one.

  17. Likes Coatingsarecrack, opie liked this post
Page 1 of 3 123 LastLast

Similar Threads

  1. Best finishing product for red/maroon
    By ToddA in forum Product Reviews
    Replies: 14
    Last Post: 04-11-2020, 03:29 PM
  2. Painted & Cleared Gel Coat on Boat Finishing Product?
    By thill381 in forum Ask your detailing questions!
    Replies: 1
    Last Post: 09-18-2018, 07:51 PM
  3. Replies: 1
    Last Post: 11-03-2017, 01:52 PM
  4. Finishing pad soaking up product...
    By TH3M B0N3Z in forum Ask your detailing questions!
    Replies: 11
    Last Post: 01-25-2013, 07:23 PM
  5. Product Review: XMT Carnuba Finishing Glaze & XMT Pad Conditioner
    By Totoland Mach in forum New Car Care Products
    Replies: 6
    Last Post: 05-01-2006, 12:43 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» April 2024

S M T W T F S
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 1234