Did I burn through the clearcoat?

**PrinceZ** · 03-10-2021, 08:17 PM

Did I burn through the clearcoat?

Hi.

Can anyone tell me if I burned through my clear coat? I'm not sure if I did since the surface is still glossy and smooth.

There's also a spot that looks lighter.

Let me know.

Did I burn through the clearcoat?-send1-jpg

Did I burn through the clearcoat?-send-jpg

**IH8SPM** · 03-10-2021, 08:20 PM

The looked like you went through clear and paint down to primer. Also looks like thsy oanel my habe been previously painted or irs the picture.

Sent from my SM-N986U using Tapatalk

**PaulMys** · 03-10-2021, 08:26 PM

All I can make out are reflections of clouds?

Maybe take pics in less direct light or in a garage?

**PrinceZ** · 03-10-2021, 08:28 PM

on the first pic im only talking about the middle/left of the pic. the stuff on the right is just dried product

**PrinceZ** · 03-10-2021, 08:32 PM

Did I burn through the clearcoat?-sendunnamed-1-jpg

**PaulMys** · 03-10-2021, 08:40 PM

Originally Posted by PrinceZ

on the first pic im only talking about the middle/left of the pic. the stuff on the right is just dried product

Download Taptalk.

You can send a much clearer/better/bigger pic.

**PrinceZ** · 03-10-2021, 08:56 PM

can i link a site where i posted the pic?

**PrinceZ** · 03-10-2021, 09:16 PM

sendunnamed-1 — ImgBB here's the link

**Coatingsarecrack** · 03-11-2021, 03:23 AM

Sorry your pics didn’t come through in the PM. I thought in a previous thread that I may have burn through clear coat.

From what I gathered if it’s basecoat/clear and you burn through you’ll get base coat color on your pad.

I couldn’t figure it out with info i got here as it was hard to tell in pics.

I took it to Griots and they thought it was some kind of dealer installed coating.

Could push the edges out with a cutting microfiber pad and Fast correcting cream but no transfer of paint to pad.

Sent from my iPhone using Tapatalk

**Coatingsarecrack** · 03-11-2021, 03:25 AM

Originally Posted by Coatingsarecrack

Sorry your pics didn’t come through in the PM. I thought in a previous thread that I may have burn through clear coat.

From what I gathered if it’s basecoat/clear and you burn through you’ll get base coat color on your pad.

I couldn’t figure it out with info i got here as it was hard to tell in pics.

I took it to Griots and they thought it was some kind of dealer installed coating.

Could push the edges out with a cutting microfiber pad and Fast correcting cream but no transfer of paint to pad.

Sent from my iPhone using Tapatalk

Also alot of people here including my not gonna click on link to pics.

If you download Tapatalk it’s a forum hosting app that lets you download pics straight from your phone. It’s free unless you wanna upgrade

Sent from my iPhone using Tapatalk