-
3D One AIO Polish Cure Time
Hi… I will like your advise as i am a newbie and want to be sure i am doing things well.
I started using 3D One AIO which i like on my cars where to me the paints are very good.
My question is, after i apply the AIO should i wait a fairly amount of time to cure in order to top it with a coat of wax or i can do it immediately?
Thanks in advance...
-
Re: 3D One AIO Polish Cure Time
3D ONE is not a AIO. It's a true compound or polish depending on pad used. 3D/HD speed is a AIO which offers protection.
-
Re: 3D One AIO Polish Cure Time
Originally Posted by
Justin at Final Inspection
3D ONE is not a AIO. It's a true compound or polish depending on pad used. 3D/HD speed is a AIO which offers protection.
Yes you are correct. I misspelled the name. 3D/HD is the one i have.
Should i leave it cure for any specific time prior a top of wax?
-
Re: 3D One AIO Polish Cure Time
Originally Posted by
wcharon
Yes you are correct. I misspelled the name. 3D/HD is the one i have.
Should i leave it cure for any specific time prior a top of wax?
After I leave the 3d speed on for an hr, i apply 3d poxy right away.
-
Re: 3D One AIO Polish Cure Time
If you are looking for a killer AIO, Blackfire One Step is amazing. I top it with Blackfire liquid hybrid wax for extra pop and protection
-
Re: 3D One AIO Polish Cure Time
Originally Posted by
Billy Baldone
If you are looking for a killer AIO, Blackfire One Step is amazing. I top it with Blackfire liquid hybrid wax for extra pop and protection
Thanks @Billy Baldone…. I will give it a look. Thanks for the suggestion.
-
Re: 3D One AIO Polish Cure Time
Originally Posted by
wcharon
Thanks @Billy Baldone…. I will give it a look. Thanks for the suggestion.
I really like 3D HD speed. I tried the blackfire one step aoi and it was decent but prefer 3D HD speed and gave the blackfire to a friend. I follow it up with 3D poxy after speed.
-
Re: 3D One AIO Polish Cure Time
Ok. Yeah poxy is a great topper with speed. You can do it within an hour or so.
-
Re: 3D One AIO Polish Cure Time
Perfect. That clarifies my doubts on the approach to use. This is getting complicated with so much options. Jajajajjajajaj
I was thinking to top it with Collinite 845.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: 3D One AIO Polish Cure Time
Originally Posted by
wcharon
I was thinking to top it with Collinite 845.
If you top with Collinite 845 -
Learn the way of Collinite 845 by applying to a section about 12 inches square or so. Allow to dry and then wipe off. This will show you the wipe-off characteristics of the wax and teach you to apply a THIN coat.
See my article here,
A tip for working with waxes, paint sealants or coatings that are new to you
Bookmarks