PDA

View Full Version : Best product for filling swirls and minor scratches?



Pages : [1] 2

Chicagoil135
12-01-2016, 09:28 PM
Hey Guys,

I am very new to detailing and not quite ready to jump in to purchasing a DA and doing a proper paint correction, but I do want to at least apply a sealant. I purchased some Collinite 845, but my understanding is that this does not do much to fill the swirl marks and/or minor scratches. Since I am not doing a proper paint correction with a DA, what do you guys suggest I put on prior to 845 that will fill in some of the swirls and at least hide some of the imperfections? I am not looking for perfection, just something that will help the appearance a little.

Along with the Collinite I bought some Wolfgang Uber Rinseless and plan to apply Iron X and clay with the Nanoskin Fine Towel to prep the car for the Collinite.

I also had a question about using an isopropyl alcohol solution after claying. It is necessary to do that right before applying the Collinite or before putting down a glaze?

My car is a 2012 Altima in Steel Gray Metallic if that matters. I can add some pics later if that helps.

Love the forum!

Thanks!

Coopers ST
12-01-2016, 09:31 PM
I think a glaze is what you would want.

ronkh57
12-01-2016, 09:32 PM
following what you said you want to do............
wash
clay
re-wash
glaze
wax


my glaze of choice is Poorboys. For you poorboys white diamond is probably the right choice.

GSKR
12-01-2016, 09:34 PM
You will find a lot of filler products from a production detail supply vendor.

Rsurfer
12-01-2016, 09:39 PM
Car Pro Essence is an AIO, fills and protects in one step.

Chicagoil135
12-01-2016, 09:40 PM
I think a glaze is what you would want.

Any suggestions on a good glaze?

Chicagoil135
12-01-2016, 09:42 PM
following what you said you want to do............
wash
clay
re-wash
glaze
wax


my glaze of choice is Poorboys. For you poorboys white diamond is probably the right choice.

It looks like this is for light colored cars, mine is a med dark grey. Does it even matter?

Chicagoil135
12-01-2016, 09:46 PM
Car Pro Essence is an AIO, fills and protects in one step.

Can this be applied by hand?

ronkh57
12-01-2016, 09:47 PM
It looks like this is for light colored cars, mine is a med dark grey. Does it even matter?

your choice

white diamond for light
black hole for dark

GSKR
12-01-2016, 09:50 PM
3m imperial paste wax fills like crazy.

Coopers ST
12-01-2016, 09:55 PM
Any suggestions on a good glaze?

When I purchased my polisher it came with Wolfgang glaze. I have used it but with a polisher. I don't know how it would be by hand.

Chicagoil135
12-01-2016, 10:05 PM
3m imperial paste wax fills like crazy.

This stuff?

3M Perfect It Show Car Paste Wax, 3m 39526, creates an ultra high gloss finish, with long-lasting protection! (http://www.autogeek.net/3mpershowcar.html)

Rsurfer
12-01-2016, 10:42 PM
Can this be applied by hand?

Yes and it's called Essence Plus.

FUNX650
12-01-2016, 10:51 PM
This glaze has been especially
formulated to be packed-full
with fillers:

Menzerna Top Finish Machine Glaze, Finishing Glaze PO 115C (http://www.autogeek.net/menzerna-finishing-glaze.html)

{Can be applied by hand or machine.}


Bob

GSKR
12-02-2016, 06:57 AM
This stuff?

3M Perfect It Show Car Paste Wax, 3m 39526, creates an ultra high gloss finish, with long-lasting protection! (http://www.autogeek.net/3mpershowcar.html)
Yes that's it.