Dislikes: 0
-
2020 Lincoln Corsair - LSN Autodetailing (reprise)
Been a long time since I posted a show-n-shine, but here we go.
I got a 2020 Lincoln Corsair in Metallic Black. Not new, but new to me, has 27K Miles and was an AZ lease return. It landed at my buddy's dealership. His sales guy decided to drive it through the tunnel and then use some old crappy rags to dry it off. This vehicle has seen nothing but automated carwashes thus far. Wheels were a mess, exterior was a swirled up mess, and someone made a half-hearted attempt with the interior. Also, prior to auction, someone made a half hearted attempt at rotary buffing. I loved the holograms, I could stare into them for days. LOL
The difficulties: I've been chipping away at this vehicle since last week. Our temperatures here in AZ have been like the surface of Mars, nights haven't been any better. The best temps are between 5:00 am and about 10:00am. After that I have to shut down. 100 degrees is my limit for working outside.
- DeFelsko PTG - All paint read within typical Ford specs. (this was done prior to the sale).
- Megs Wheel Cleaner
- Taminator
- Wolfgang Total Engine Cleaner
- Pinnacle Tail Tip cleaner with some 0000 Steel Wool
- Wash - Megs Hyperwash
- Griot's Garage Medium Speed Clay Mitt w/ Megs D114 as clay lube
- Paint Correction - Various Boss pads, but mostly BOSS MF pads and BOSS FCC
- Erasure
- GTechniq EXO on paint and Wheels
- GTechniq Trim Restorer & Coating -----> First time using this, love it! I ran out half way through though... but more is on order.
I did not put shine stuff on the tires, just ran out of time. Another day.
I DID NOT touch the interior, I ran out of time and will get to that probably end of August or September, maybe October when temps start to drop.
Before: Swirls, Scratches and Holograms:
Wash:
HOOD Before: Swirls and Scratches
SWIRLS AND SCRATCHES IN THE HOOD. There were a few doozies, I hit with multiple tries at sections passes. Mostly got everything.
HOOD AFTER PAINT CORRECTION:
ROOF Before: Swirls and Scratches, water spots:
ROOF After:
B PILLAR Before:
B PILLAR AFTER (Piano Black Plastic all over this car!!)
Correction Complete, Erasure Wipe down and done for the day.
Trim Before:
Trim After:
COMPLETE!!! (except for some more trim work, under hood work and interior) But the MRS WANT'S TO DRIVE IT!!!! Boss's orders!
REFLECTION SHOT!
Thanks for viewing!
-
Post Thanks / Like - 2 Thanks, 11 Likes, 0 Dislikes
-
Super Member
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
Looks great!
I hang in AZ for winters. What’s your trick to keep the foam from frying on the surface?
-
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
Originally Posted by John U
Looks great!
I hang in AZ for winters. What’s your trick to keep the foam from frying on the surface?
Thanks!
Use lots of pads. I think I used a combination of about 12 pads. Mostly BOSS Microfiber, and a few BOSS White Pads and BOSS Orange.
I have a bucket filled with water/snappy clean, and expended pads go in the bucket. You have to pay attention to not only air temperature, but the temp of the pad.
I typically never use a pad on more than one panel. By the time it comes off the DA it's HOT! This is where failure occurs, and not the type of failure you want.
In AZ glue has a tendency to evaporate into the ether, so always change pads often and check your temps. Don't push it!
-
Super Member
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
Oops, I meant your foam gun. I find the evaporation is very fast in the Valley of the Sun!
-
Super Member
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
Love the newer Lincoln’s!
Sent from my iPhone using Autogeekonline mobile app
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
I just love the new Lincolns. The MKZ is a sharp car., as is the Continental.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
Awesome stuff, Paulie!!
Great to read your post, and Congrats on the new ride!!
It is no coincidence that man's best friend cannot talk.
-
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
Originally Posted by John U
Oops, I meant your foam gun. I find the evaporation is very fast in the Valley of the Sun!
Oh, I see. I don't have any issues. I set the AGO Foam Tank to FULL-Auto (Eleven), and make sure I put enough Megs Hyperwash in there. Never an issue.
I use Purtech Industrial Water Tank so I can take my sweet time, and Hyperwash is sun safe.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: 2020 Lincoln Corsair - LSN Autodetailing (reprise)
Nicely done, congrats on the new ride and great to see ya posting again!!!
Scott Harle
Autodermatology
#autodermatology
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
Similar Threads
-
By LSNAutoDetailing in forum Show N' Shine
Replies: 10
Last Post: 04-24-2018, 02:49 PM
-
By LSNAutoDetailing in forum Show N' Shine
Replies: 11
Last Post: 10-05-2016, 07:37 PM
-
By LSNAutoDetailing in forum Show N' Shine
Replies: 10
Last Post: 06-30-2016, 08:00 PM
-
By wangotango in forum Auto Detailing 101
Replies: 6
Last Post: 05-25-2012, 04:02 PM
-
By rjgervacio in forum Auto Detailing 101
Replies: 24
Last Post: 04-15-2011, 09:41 PM
Members who have read this thread: 4
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks