Drying Aid

[Bill D]

Same here. PFMs work wonderfully!

[The Guz]

Topper by Xtreme Solutions.

Topper offers great gloss, slickness, and a very pleasant scent. It is a pleasure to use and work with and it gives a boost of ceramic protection. I also think it is a good value. You can buy a gallon of the stuff for under $40.

You can get Adams slick and slide. It’s the same product and always on sale. Same as the obsessed garage drying aid as well.

PFM towel.

(I don't use a drying aid).

That’s boring .

On a serious note they are great towels.

[Coatingsarecrack]

Pretty much any Ceramic QD.
TWHS Wet wax is nice.
PA cosmic spritz
Kamikaze OC
Adam’s Slick and Slide.


Sent from my iPhone using Tapatalk

[dgage]

My favorite has been Glassparency Boost. Pretty stout for a drying aid/topper so it seems to have a higher concentration of SiO2 than many other products I’ve tried.

[DFB]

This is one of my favorite products to choose at each wash. I can't pick just one, so I have a list that get frequent use -

P&S Bead Maker - hard to beat for gloss, slickness and scent. Longevity and dusting have never bothered me.

P&S Paint Gloss - similar to Bead Maker but without the "protection".

Obsessed Garage Drying Aid / Adam's Slick and Slide - easy to use, great gloss, great slickness. The Adam's smells divine.

Meguiar's Hybrid Ceramic Detailer - super easy to use, easily one of their best products.

NV Boost v2 - Similar to Megs HCD, just without the ye-olde-world car polish scent.

[noorth]

ech20 cut 1:20 is probably one of your best bang for the buck. You can use any rinse less actually for a drying aid. Not sure what dilution i would use with something like P&S absolute or DIY.

[Desertnate]

PFM towel.

(I don't use a drying aid).

Yep. This is me too. With a coating, I can do a flood rinse on a vehicle and the car is almost totally dry. I just go over it lightly with a towel to dry the horizontal surfaces where water can't run off easily and dab up the few drops/dribbles that didn't sheet off in the flood rinse.

CarPro Ech2o diluted 1:20.

This. On really hot or windy days I'll go over the car with Ech2o to clean up any random water spots, but that's about as close as I get to a "drying aid". It's more like a "post-wash water spot hunt".

[CleanIT]

ech20 cut 1:20 is probably one of your best bang for the buck. You can use any rinse less actually for a drying aid. Not sure what dilution i would use with something like P&S absolute or DIY.

Leaves really good gloss behind too. I was impressed by that alone.

Of interest to me is the TW Wet Wax, Adam's Slick and Slide and Adam's Graphene Boost.

[2FORDS]

according to Adam's web site, Slick and slide should not be used as a drying aid? Has that changed?

[Coatingsarecrack]

according to Adam's web site, Slick and slide should not be used as a drying aid? Has that changed?

They drying aid they do recommend is $80 a gallon. SnS is $40. Pretty sure that has nothing to do with it.

Think [mention]The Guz [/mention] tried it and OG drying aid. He says there the same after trying I’m good with that.


Sent from my iPhone using Tapatalk