-
Re: Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
Justin at Final Inspection
Awesome srt Jeep! Nice job too. Keep us updated!
waiting a month to put on a second coat will it still bond? cosmic primer spritz then coat #1 wait about a month cosmic primer spritz then coat #2. Is this a problem? Do I need a 3rd coat after #2?
-
Super Member
Re: Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
tim500
waiting a month to put on a second coat will it still bond? cosmic primer spritz then coat #1 wait about a month cosmic primer spritz then coat #2. Is this a problem? Do I need a 3rd coat after #2?
I would e-mail them if I had your concerns
I always apply two coats and follow the directions
-
Re: Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
luckydawg
I would e-mail them if I had your concerns
I always apply two coats and follow the directions
hopefully it will be ok.
-
Super Member
Re: Polish Angel Glasscoat Cosmic (Quick Take)
-
Re: Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
luckydawg
I read all that prior to application. I have left over glasscoating and want to use it but if its not going to bond I am not going to waste my time. The other issue is do I need to use primer spritz before additional coats. I have never seen any discussions other than start the whole process over again strip off old etc. etc.
-
Super Member
Re: Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
tim500
I read all that prior to application. I have left over glasscoating and want to use it but if its not going to bond I am not going to waste my time. The other issue is do I need to use primer spritz before additional coats. I have never seen any discussions other than start the whole process over again strip off old etc. etc.
I’d skip the primer spritz
Sent from my iPhone using Tapatalk
-
Re: Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
Coatingsarecrack
I’d skip the primer spritz
Sent from my iPhone using Tapatalk
the spritz is just for the 1st application?
-
Super Member
Re: Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
tim500
the spritz is just for the 1st application?
Yeah it’s to prime the paint for the Cosmic to adhere. It would probably remove 1st layer. Cosmic has no problem sticking to Cosmic.
Sent from my iPhone using Tapatalk
-
Re: Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
Coatingsarecrack
Yeah it’s to prime the paint for the Cosmic to adhere. It would probably remove 1st layer. Cosmic has no problem sticking to Cosmic.
Sent from my iPhone using Tapatalk
how do you find the longevity of cosmic? how does it compare to others in longevity like Kamikaze Overcoat? Lastly, can I use cosmic and overcoat on the same vehicle?
-
Super Member
Polish Angel Glasscoat Cosmic (Quick Take)
Originally Posted by
tim500
how do you find the longevity of cosmic? how does it compare to others in longevity like Kamikaze Overcoat? Lastly, can I use cosmic and overcoat on the same vehicle?
I find both to be around 3 months max for my liking. Both are still there and working but for coating like beading and self cleaning around 2 months.
I use both sometimes. Does it work I couldn’t tell you for sure.
Some will say no problem it will layer.
Some will say the first layer will shed the second layer like contamination.
Some will say the second layers solvents will remove the 1st.
I couldn’t tell you which one is right as I believe when I read these opinions most seemed to make sense.
I can tell you that I like the look I got on MY car at the time of Cosmic on top of OverCoat (BP1 wife’s also likes this combo)
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
Bookmarks