-
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
Pic
-
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
Looks GREAT!
Thanks for making the YouTube video also...
-
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
it does! Much appreciated, Mike! About to comet wash the rest of the car.
-
-
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
Video of Charger after Meguiar’s #7 rubdown/removal.
-
Super Member
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
Skip rotary and go straight to DA and Blackfire One step....Done.
If you feel megs #7 is dry during wipe off---do another application and another 24 hours.
I have done as much as 5 to 7 applications before DA'ing the paint with a One step.
If megs is wet after 24 hours---means oils from megs have completely filled the paint and the paint no longer can absorb any more of the megs oils.
Then go ahead and do light cut with One Step....
Tom
Mr Tommy's
Wash, Buff, Wax
Website: mrtommyshine.com
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
And no---it won't dry out.
You'll be good for a long time.
Tom
Mr Tommy's
Wash, Buff, Wax
Website: mrtommyshine.com
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
Gotcha, thanks Tom! Oddly enough the passenger side of the car feels a little wetter than the driver side. Maybe I’ll add more Meguiar’s to the driver side.
I wonder if it has anything to to with the fact that I’d already done some half-hearted buffing with a DA on the passenger side, but the driver side only went through clay bar and comet wash.
-
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
Hi Ted,
Tom is correct.
Here's the deal, #7 is water soluble. It's not an abrasive product and it's not a product to SEAL the surface, like a wax, sealant or coating. So after you're finished with the #7 Rub Down Technique - Machine apply "something". The BLACKFIRE One Step would be a great choice as besides sealing the paint it will remove other paint defects like swirls, scratches and more oxidation.
I would NOT recommend using a rotary buffer at this point. Stick to any brand of free spinning random orbital polisher like the Porter Cable. Use a foam polishing pad and turn that sucker up to the highest speed setting and then start making section passes.
DO start by doing a Test Spot and make sure the end results look great. Some old single stage paint simply doesn't like to be abraded with any brand of anything - thus the reason you do a Test Spot BEFORE buffing out the entire car. If your results from the Test Spot don't look great - at least you only have to fix the test spot area.
If you buff out the entire car without knowing the results and the results are bad - now you have to fix the entire car.
Make sense?
-
Re: Need advice - Oxidized Paint Correction on 1968 Dodge Charger
For everyone that will read this thread into the future,
Here's a video Yancy and I like and it covers EVERYTHING related to using Meguiar's #7 to restore antique, original single stage paint.
Easily the BEST video on this topic anywhere in the universe.
Bookmarks