-
Super Member
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
Not that I can afford one now, but will the 3402 get discontinued?
How will it get repairs done, if it gets replaced?
I’m assuming the replacement will use same parts?
Sent from my iPhone using AGOnline
My goal in life is to love God, family and myself. To love others and treat others right.
-
Super Member
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
As soon as I can...will get a 2nd beast. Just never know what future holds.
One of the tool can be for parts if things really gets tight. But these things lasts for years anyway....I'll prolly at a nursing home before my first Flex fails! Lol...
Tom
Mr Tommy's
Wash, Buff, Wax
Website: mrtommyshine.com
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
For anyone that finds and reads this article into the future....
The original FLEX XC 3401 VRG is going to be discontinued. At the date I'm writing this, Tuesday, December 29th, 2020 - I've been told within the next 2 years.
So if you want one of the originals - better get one while the getting is good.
If you opt for its replacement, my favorite polisher, the Supa BEAST, then get the larger backing plate and switch over as soon as you unbox it.
Supa BEAST backing plate swap
Might as well take full advantage of all the available power with a larger footprint and get in and get the job done.
-
Super Member
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
Originally Posted by
TMQ
As soon as I can...will get a 2nd beast. Just never know what future holds.
One of the tool can be for parts if things really gets tight. But these things lasts for years anyway....I'll prolly at a nursing home before my first Flex fails! Lol...
Tom
Maybe I'll get a 3rd, myself. Love The Beast
Sent from my SM-N960U using Tapatalk
-
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
Originally Posted by
JustJesus
Maybe I'll get a 3rd, myself.
Love The Beast
For you and everyone thinking about getting the original BEAST - aka the FLEX XC 3401 VRG - better do it sooner than later.
FLEX is already discontinuing these tools in other countries. They are still being built but they are no longer shipping to other countries as they are phasing this tool out for the new Supa BEAST and CBEAST versions.
ALSO
If you have a BEAST or if you are going to buy a BEAST then you better stock up a few extra backing plates for this tool.
The backing plate for the BEAST is UNIQUE. There are NO other backing plates like it. Once they are gone - your tool becomes useless.
And keep this in mind - backing plates are WEAR ITEMS - it's only NATURAL that with use and TIME - they wear out.
Here's the link,
Flex XC 3401 VRG 5.5 inch Backing Plate
You snooze... you lose...
Just sayin....
-
Super Member
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
Originally Posted by
Mike Phillips
For you and everyone thinking about getting the original BEAST - aka the FLEX XC 3401 VRG - better do it sooner than later.
FLEX is already discontinuing these tools in other countries. They are still being built but they are no longer shipping to other countries as they are phasing this tool out for the new Supa BEAST and CBEAST versions.
ALSO
If you have a BEAST or if you are going to buy a BEAST then you better stock up a few extra backing plates for this tool.
The backing plate for the BEAST is UNIQUE. There are NO other backing plates like it. Once they are gone - your tool becomes useless.
And keep this in mind - backing plates are
WEAR ITEMS - it's only NATURAL that with use and TIME - they wear out.
Here's the link,
Flex XC 3401 VRG 5.5 inch Backing Plate
You snooze... you lose...
Just sayin....
Thanks for the reminder!!
Like the LC backing plates, when they're gone, they're gone
Sent from my SM-N960U using Tapatalk
-
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
Originally Posted by
JustJesus
Thanks for the reminder!!
Like the LC backing plates, when they're gone, they're gone
Sent from my SM-N960U using Tapatalk
Are the lc backing plates still available for the flex 3401 if your using 5" pads? I believe I swap to a lc 4" bplate
Sent from my SM-G973U using Tapatalk
-
Super Member
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
Originally Posted by
2011 302
Are the lc backing plates still available for the flex 3401 if your using 5" pads? I believe I swap to a lc 4" bplate
Sent from my SM-G973U using Tapatalk
That's the one I was referring to
They were on clearance for a time, then "out of stock" -so no longer available
Sent from my SM-N960U using Tapatalk
-
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
Originally Posted by
JustJesus
That's the one I was referring to
They were on clearance for a time, then "out of stock" -so no longer available
Sent from my SM-N960U using Tapatalk
Guess the oem ones getting turned down in the lathe
Sent from my SM-G973U using Tapatalk
-
Super Member
Re: Why I call the FLEX 3401 the BEAST! by Mike Phillips
I seen someone do something like that.
Or maybe some company can reproduce them? If the demand was high enough, im sure LC would make them. Doubtful of the demand, with so many liking long throw machines. But I don't know.
Sent from my SM-N960U using Tapatalk
Bookmarks