-
Super Member
Re: Any recommendations on applying M37 paint coating V2?
Originally Posted by
MrOneEyedBoh
Thanks. I'd assume that if you can top it pretty much immediately , then the coating has cured pretty much 100% right? When I was applying it it still baffles my mind that it's pretty much a wipe on wipe off and it still forms a layer...
Apparently the 10MPS is a coating lite so they share many ingredients. So I think for that reason it doesn’t hurt the coating but something in it must cause it to cure faster since the Sealant was made to be WOWA. Hopefully Nick will see this and give us more details.
-
Super Member
Re: Any recommendations on applying M37 paint coating V2?
Yeah but I mean the coating, how it is pretty much wipe on a few times in cross hatch and then buff off completely.
-
Super Member
Re: Any recommendations on applying M37 paint coating V2?
Originally Posted by
MrOneEyedBoh
Yeah but I mean the coating, how it is pretty much wipe on a few times in cross hatch and then buff off completely.
I guess every coating can be different with flash times. Gyeon Mohs and CSL are similar, very little wait between wipe on and wipe off. I guess it can vary with air temp and humidity too.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Any recommendations on applying M37 paint coating V2?
Originally Posted by
BSoares
Yeah, I’d say if you can’t use it within 3 months you’ll waste the rest of the bottle. It cures very fast in the bottle after opened.
I have transferred the coating into plastic bottle droppers, and stored in the fridge, since I don't have that many cars to coat. This is from last summer.
I will be breaking it out this spring, to recoat two cars I did a while ago (need to do some swirl correcting).
As far as I can tell, storing it in tight sealing plastic bottles, and the fridge, semm to have stopped the gelling issue, which happened on my first bottle. I have also done this with my wheel coating.
Eric
-
Super Member
Re: Any recommendations on applying M37 paint coating V2?
Originally Posted by
ejaf
I have transferred the coating into plastic bottle droppers, and stored in the fridge, since I don't have that many cars to coat. This is from last summer.
I will be breaking it out this spring, to recoat two cars I did a while ago (need to do some swirl correcting).
As far as I can tell, storing it in tight sealing plastic bottles, and the fridge, semm to have stopped the gelling issue, which happened on my first bottle. I have also done this with my wheel coating.
Eric
I hope it works well. If it gets too hard to wipe off when you go to coat the car, that shows it's already curing even though it's not gelled up. So you may want to have a backup plan in case that happens right when you start coating.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
ejaf thanked for this post
-
Re: Any recommendations on applying M37 paint coating V2?
Originally Posted by
BSoares
I hope it works well. If it gets too hard to wipe off when you go to coat the car, that shows it's already curing even though it's not gelled up. So you may want to have a backup plan in case that happens right when you start coating.
gotcha.
Eric
-
Re: Any recommendations on applying M37 paint coating V2?
Originally Posted by
Calendyr
That sounds like a good idea. How much are you paying for these?
Sorry I just saw this...
I ordered a bunch of them (like 50) off of fleabay a year ago...can't remember which ones specifically, but can search my order history if you are interested...just PM me.
Eric
Bookmarks