-
Two project cars for Mobile Tech Expo Classes
Two project cars for Mobile Tech Expo Classes
If you're attending MTE you'll see the before and after of these two cars plus the tools, pads and products used to perfect them...
-
Post Thanks / Like - 0 Thanks, 4 Likes, 0 Dislikes
-
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Re: Two project cars for Mobiel Tech Expo Classes
1970 Buick Gran Sport
Before
Test Spot
After
Battery Life Test Results for FLEX Cordless Rotary Polisher & FLEX Cordless XFE7 15 Orbital Polisher
-
Re: Two project cars for Mobiel Tech Expo Classes
Battery Test continued...
-
Super Member
Re: Two project cars for Mobiel Tech Expo Classes
Looking forward to seeing these at MTE.
-
Junior Member
Re: Two project cars for Mobiel Tech Expo Classes
Hey Mike, Scott here with the dark red IROC-Z you saw in Orlando. I was planning on going to MTE this year and will stop by the booth. Not guaranteed that I'll be there though. Hopefully I can get there.
-
Re: Two project cars for Mobiel Tech Expo Classes
Originally Posted by
Guyb
Looking forward to seeing these at MTE.
Working on the pictures for the 1970 Buick right now...
Originally Posted by
scottmoyer
Hey Mike, Scott here with the dark red IROC-Z you saw in Orlando.
I was planning on going to MTE this year and will stop by the booth. Not guaranteed that I'll be there though. Hopefully I can get there.
Sure I remember you Scott, how can I forget the PERFECT paint on your IROC-Z car!
Hope to see you there...
I stay very busy, but always time to talk shop...
-
Re: Two project cars for Mobile Tech Expo Classes
Hello, Uncle Mike
I saw the red camaro for your show-car project, aiming to remove 90-95% of the defects on the paint. You use the yellow pad + keramik gloss (fine) in the second test spot..
Do you use blue pad + zephir only for positions where yelow pad + keramik can not remove the scratch? Or did you use the blue pad + zephir for the entire paint surface in one step? and then finish your job
-
Re: Two project cars for Mobile Tech Expo Classes
Could you tell me about 8 section passes with rupes? set up speed?hand speed? compound ? I know that each person has their own method. I want to know to refer to myself, thank you for sharing
I usually use the following. Does it have the correct? my polisher Rupes mark II 15mm
Step 1: Blue pad + zephir => I removed the scratch. My finish on the paint surface is the micro swirl (I'm much exposed to the Japanese car)
I set the zephyr to blue pad (5 drops), set 1 speed, 2 passes move hands quickly on the section (40 -45 cm), next set 4 speed, move slow hand, 50-50 over lap, 4 passes up - down / left - right and cover.
Step 2: Yelow pad + Keramik => finish
Step 3: White pad + diamond (if dark colour)
I'm right ? Uncle Mike.
-
Re: Two project cars for Mobile Tech Expo Classes
I’m busy with MTE until next week.
In the IDA Board Meeting right now...
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Bookmarks