Total Swirl Remover Kit then Uber Ceramic?

[JZPD405]

I have never used a ceramic coating before but have been looking into them. I just picked up a new 2016 Audi A7 and used the total swirl remover, finishing glaze and then the deep paint sealant on it. Can I use the uber ceramic on top on the paint sealant or is it one or the other?

Thanks for the help!

[willtothewong]

I have never used a ceramic coating before but have been looking into them. I just picked up a new 2016 Audi A7 and used the total swirl remover, finishing glaze and then the deep paint sealant on it. Can I use the uber ceramic on top on the paint sealant or is it one or the other?

Thanks for the help!

While I have never used any type of coating (yet), I'd imagine you want to put the coating on a BARE surface. So either polish/wax remover on your point, then some type of IPA or various coating paint prep THEN coating.

Other members please let me know if my logic makes sense and/or is correct.

[JZPD405]

Thanks, I know it states that you can use the compound and finishing glaze prior to the coating so I figured the swirl remover, then the finishing glaze would be ok prior to the coating but didn't know about the sealant.

[apthai]

Thanks, I know it states that you can use the compound and finishing glaze prior to the coating so I figured the swirl remover, then the finishing glaze would be ok prior to the coating but didn't know about the sealant.

The coating must be applied to your clear coat. You can't apply it over a sealant.

If you already polished it and currently have DGPS3 then I'd use Finishing Glaze again to remove the DGPS3. Manufacturer recommends using WG Perfekt Finish Paint Prep before applying Uber Coating.

[JZPD405]

Thanks apthai, that makes sense and what I was leaning towards, but wanted to know for sure.