Thanks: 0
Likes: 0
Dislikes: 0
-
Bare aluminum rims with acid spots around rivets/bolts - please help
I've learned my lesson on using detail spray on uncoated aluminum rims. Unfortunately, I didn't wipe all the detail spray off and it left parts of the rim "milky" with spotty white discoloration from the acid.
I did search the forum and found an older thread that recommended Powerball Mini MD and Powermetal Scratch Removing Polish. Is this the best solution today? I also have closely spaced rivets/bolts around the whole inner portion of the wheel. The hexagonal bolts have a sharp edge and I am concerned that it will rip apart the Powerball or any similar product. The Powerball also may not be able to address the small areas between the bolts.
Any suggestions would be greatly appreciated?
-
Super Member
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
What kind of detail spray did you use?
-
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
I'm curious of the spray detailer as well - none of them (that I'm aware of) are acid based. If product just dried on the rim surface, try applying some more, and wiping it well. That usually removes any dried product.
As for the PowerBall Mini MD, it's designed to operate at <300 RPM. Low speed will not damage the ball. Damage almost always comes from too high of operating speed, or using a ball with dried polish on it - it needs to be cleaned after each use, and allowed to air dry before reassembly and storage.
-
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
I used Meguiar's Gold Class Quik Wax or M-Tech detail spray. The discoloration looks like those I have seen on pictures here of aluminum rims with acid damage but I could be wrong. I tried rubbing the area with PowerMetal polish by hand but it had no effect.
Would the exposed rivets not shred the PowerBall?
-
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
I don't see why the Powerball Mini wouldn't work around the rivets but personally I use the Mothers Powercone. I have a client that I polish his wheels twice a year and use the Powerball, powerball mini, and power cone. If you use too much polish it can fill in the rivet heads so don't forget to clean it out.
"Challenge yourself to live a better tomorrow than you did yesterday"
-
Super Member
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
What was used to wash the wheels?
-
Super Moderator
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
Hmm... Spray Detailers shouldn't have acid in them. Maybe an acid based wheel cleaner caused the discoloration on your bare aluminum rims? Try using the Mother Billet Metal Polish with the Mothers PowerBall to polish the surface of your rims. Good luck!
Mothers Billet Metal Polish cleans and shines billet, forged, and finely cast aluminum, brass and all polishable metals. Professional detailers,
-
Junior Member
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
Originally Posted by 924RE
I used Meguiar's Gold Class Quik Wax or M-Tech detail spray. The discoloration looks like those I have seen on pictures here of aluminum rims with acid damage but I could be wrong. I tried rubbing the area with PowerMetal polish by hand but it had no effect.
Would the exposed rivets not shred the PowerBall?
"had no effect" -- did the applicator turn black?
Can you post some photos?
Mothers Polish
Customer Service & Technical Support
jimd@mothers_dot_com
-
Super Member
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
Sounds like the OP used an acid based wheel cleaner.
-
Re: Bare aluminum rims with acid spots around rivets/bolts - please help
Sorry it turns out the wheel is not bare aluminum. It is Speedline with a clear coat or lacquer coat on the rim which may explain why there was no black residue when I rubbed the PowerMetal polish on the affected area.
The wheels have not been washed or sprayed with any wheel cleaner, only the Meguiar Quik Wax and M-tech detail spray was used.
The bolts/ rivets have a star shape and sit above the surface of the rim (not embedded in the rim) so I thought these might tear apart the Powerball or cone. Are there smaller Powerball-like attachments that can get into small/ tight spaces?
Similar Threads
-
By RZJZA80 in forum Auto Detailing 101
Replies: 11
Last Post: 01-26-2020, 03:15 PM
-
By C5Longhorn in forum Wolfgang Car Care
Replies: 3
Last Post: 12-28-2016, 12:34 AM
-
By KillaCam in forum Auto Detailing 101
Replies: 6
Last Post: 01-20-2013, 01:11 PM
-
By shoeless89 in forum Auto Detailing 101
Replies: 6
Last Post: 02-12-2012, 02:18 AM
-
By Kristopher1129 in forum Auto Detailing 101
Replies: 20
Last Post: 09-02-2011, 01:56 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks