greenworks 1500psi wand replacement

[JAMM0N]

i killed the threads in my wand so i was wondering if there is a replacement for the whole thing or something better that will work with the quick disconnect.

i dont have the fitting that came with the wand when i bought it used.

so i'm using a 3/8's x 1" as a replacement but there's too much play so i was wondering if anyone used some other spray handle and wand combo to use for the foam cannon

[Setec Astronomy]

If that originally came from Lowe's or Home Depot, they usually have some replacement wands.

[JAMM0N]

if i replace the wand i want to have the fitting at the end. i might just order one online i guess if i am not able to replace the gun and wand.

just looking for options cause the 3/8 fitting i used at the end of the wand didnt work out the way i wanted and yeah leaks -_-

[CaveRacing]

I bought a trigger at Northern Tool. Then I bought a short piece of brass threaded pipe. I connected the female quick-release to the end of the little pipe.

See post #2 and #4 in this thread.

http://www.autogeekonline.net/forum/...tachments.html

[CaveRacing]

Another option, just as mentioned above, is to get a wand and gun at Lowes. Some of them already have a quick connect on the end. Like this one.

Shop Blue Hawk Pressure Washer Replacement Gun and Hose Kit for Electric Pressure Washers at Lowes.com

[JAMM0N]

yeah i am looking for the brass fitting not the silver one
i just need that attachment at the end of the wand.

[ryandamartini]

i killed the threads in my wand so i was wondering if there is a replacement for the whole thing or something better that will work with the quick disconnect.

i dont have the fitting that came with the wand when i bought it used.

so i'm using a 3/8's x 1" as a replacement but there's too much play so i was wondering if anyone used some other spray handle and wand combo to use for the foam cannon

They sell hoses and wands next to the pressure washers at my Lowes. Bluehawk I think is the name.

[JAMM0N]

ill try and find a lowes here. homedepot and menards

[ryandamartini]

ill try and find a lowes here. homedepot and menards

Any should work. I'm sure they have their own brands. The hose leading to the wand uses a standard fitting. Maybe get a new hose with good brass connectors and same with the wand?

[CaveRacing]

yeah i am looking for the brass fitting not the silver one
i just need that attachment at the end of the wand.

What silver one are you talking about? The one on the cannon? It doesn't matter if that one is silver. That's the one that usually comes with the cannon. It has a 1/4" quick-connect male end that connects to the female quick-connect that should be on your wand. If you read my posts, I showed you exactly what will solve your problem. You can go to Home Depot or Lowes and get an entire wand/gun assembly. Some of them already have the brass quick-connect on the end (I gave you a link for this, too). Attach your hose to the gun and you're done. The quick-connect coupler on the end will accept the spray tips (which are 1/4") as well as your cannon.

My posts showed you the quick-connect coupler set, too. This was in case you bought a trigger (like I showed you) and didn't want to use a long wand.

Go to Home Depot. They have all of guns, wands, hoses, and connectors in one spot. You should be able to look at the products and determine what you need.