Has anyone use D114

[Real Riders]

Has anyone used 2 ounces of Meguiars D115 in a 5 gallon bucket for a Rinseless Wash as Autogeek recommends, and if so what kind of results did you get?

[TurboToys]

Has anyone used 2 ounces of Meguiars D115 in a 5 gallon bucket for a Rinseless Wash as Autogeek recommends, and if so what kind of results did you get?

2 ounces in a 5 gallon bucket is going to yield roughly what the regular mix ratio is. i don't think when someone fills a 5 gallon bucket, that they are filling it to the brim. from what i do and what i have seen everyone do in their videos posted, most people put 4 gallons in a 5 gal bucket because there has to be some room so you don't splash and waste.

1:128 is the ratio of d114 anyway for rinseless

[Moldavite]

I use Garry Dean method and have good result

[Real Riders]

2 ounces in a 5 gallon bucket is going to yield roughly what the regular mix ratio is. i don't think when someone fills a 5 gallon bucket, that they are filling it to the brim. from what i do and what i have seen everyone do in their videos posted, most people put 4 gallons in a 5 gal bucket because there has to be some room so you don't splash and waste.

1:128 is the ratio of d114 anyway for rinseless

Yes I agree with you that no one fills a 5 gallon bucket to the top with water since there wouldn't be any room for solution and it would overflow.


I should have said : Has anyone used two ounces of D115 with two gallons of water (same as D114 ratio) for a Rinseless Wash? If so, what kind of results did you get?

[silverfox]

The best method I've used for D115 is pre-spraying the panel with a 1:8 ratio as a WW, then doing a 1oz to 2gal rinseless wash. You've got all bases covered and its not wasted. For those just doing WW, just skip the rinseless step.