What are ya'll using for work lighting?

[Just02896]

I've always used twin halogen tower lighting but have seen a few homemade twin 4' cfl on a tower with wheels. Anyone else use something like this?

[Just02896]

Did I ask a question that to which the answers are "top secret"?

[Anomander]

Going to experiment with a set up similar to Richard Lin's.
55 wat LEDs with gloss white powder coating back reflectors

[refreshauto]

3 panel LED by husky, got it at home depot. I have 2 of them

Sent from my SPH-D710 using AG Online

[FUNX650]

Did I ask a question that to which the answers are "top secret"?

In order to receive an answer to your above query:
You will first have to submit your SF-86...
admitting everything!


A friendly reminder that:
"I know nothiiiiiing"...is no longer an acceptable response.


Col. Robert "Bob" MacKracken

[ski2]

Here's a great thread from Autopia Forums that deals with garage lighting and task lighting. There are a few posts showing some inexpensive but effective light stands put together using photographic products and single diode LED flood bulbs. They work extremely well at showing swirls while working.

Finally a comprehensive review of the best bulbs out there... - Autopia Forums - Auto Detailing & Car Care Discussion Forum

[12silvy]

I built the light from the last page on that autopia thread and have been very pleased with it. I did use different bulbs however.

Pm me if you want to know the bulbs I used.

[HateSwirls]

I use halogen lights, it's as close to the sun for light as you can get IMO.
I have three of them, a twin that goes up 6', a single with a stand and a single hand held.
I'm covered

Oh I just bought an LED pen light, has like 3-4 bulbs, I keep it in my pocket
I use the sun anytime it's out, it's the best of course.