To much wetsanding?

[bova80]

Was using 2000 grit sand paper to sand out a scratch and now in 2 spots it turned white. My paint is black. Used megs 105 to buff but it didn't come out. Paint just looks cloudy. Here is a pic. Not that great.

[bova80]

The spots are highlighted by the flash

[zliegen]

Yep.. it looks like you have gone through the clear.

[04Si]

looks like primer showing

[bova80]

See I don't know if it is down that far cause there was never any color transfer to the sandpaper

[C. Charles Hahn]

Strike-through. Looks like you've got a hot date with a paint booth!

Doesn't look like primer showing, just failed clear.

[WestEnd]

Do you guys think DrColorChip would seal that until repaint? It worked wonders on my lower spoiler scrapes.

[Erik Mejia]

It appears you sanded and buffed through the clear coat. Unfortunately the only solution is to repaint the panel.

[bova80]

it doesn't even feel like its down a level though, it feels the same as the clearcoat. i hit it was megs 105, then 205 and its got wax on it, so it is protected. the pictures aren't good, it really looks like cloudy clearcoat, but i dont know. i'll have to try to take a better picture.

[Matt S.]

Looks like primer to me, but it is hard to tell with the level of focus / lighting in your pictures.