Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: Meguiars new thin pads or LC flat pads
I will say I bought the thin cutting pad and really loved the way it performed with my gg6
-
Super Member
Re: Meguiars new thin pads or LC flat pads
Meg's thin pads work great on the GG6 and even the long throw polishers. I reach for the maroon pad much more often than my MF discs because of how well they cut and the finish it leaves. The polishing pad is a dream to work with also. Super soft and smooth.
-
Super Member
Re: Meguiars new thin pads or LC flat pads
Whatever you decide make sure you get a 5" backing plate so you can use 5" or 5.5" pads--much more effective, less expensive and easier to work with than 6.5". I use 5.5" Buff & Shine pads with my GG6 and they perform very well and are very durable.
-
Super Member
Re: Meguiars new thin pads or LC flat pads
Yea I been really thinking about what size BP to go with and I been leaning towards the 5" for effectiveness.... This Volkswagen clear is HARD!!
-
Super Member
Re: Meguiars new thin pads or LC flat pads
The new Meguiar's pads are great. You may want to pick up a couple of their microfiber pads as well just to have in your back pocket.
The new thin cutting pad works really well and finishes down nicely.
-
Super Member
Re: Meguiars new thin pads or LC flat pads
Jeff Brown is doing a write and sent me some info on using the BOSS pads with the GG6. Apparently it makes the GG6 like a totally new animal.
Similar Threads
-
By willowcat11 in forum Auto Detailing 101
Replies: 14
Last Post: 08-31-2017, 08:33 PM
-
By Ncs0816 in forum Wool & Foam Buffing Pads
Replies: 0
Last Post: 10-04-2013, 08:38 PM
-
By 1953hogan in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 7
Last Post: 12-28-2012, 04:13 PM
-
By -Longhorn- in forum Auto Detailing 101
Replies: 8
Last Post: 08-18-2011, 10:58 PM
-
By Avengeance in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 10
Last Post: 08-01-2007, 04:43 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks