Thanks: 0
Likes: 0
Dislikes: 0
-
3" cyan hydrotech pads disintegrating?
I was using these on my flex 3403 today with menzerna super finish to trim out a car's edges. I was using tyem fully primed and with enough product to polish but not so much to be clogging the pad. Cleaning pads after each 18"x3" section.
The face of each pad now has chunks taken out. I even saw some of these pieces come off while polishing. Every other LC, griots, and b&s pad i have used never has exhibited this. These are my only two hydro techs and i like the sharp edge for this work but dont want to order more if this is commonplace.
-
Re: 3" cyan hydrotech pads disintegrating?
Yep have the same issue with my 3in pad/s as well.
Although off the top of my head I don't know which color (cyan or tangerine) it was, but I'll check later when I'm home. (Maybe both of them)
The adhesive holding the Velcro started coming off as well.
Won't buy them again.
-
Junior Member
Re: 3" cyan hydrotech pads disintegrating?
My hydro pads are coming apart too...LC needs to listen and respond to this somehow!!!
-
Super Member
Yes, they can sometimes basically be throw away pads. The foam isn't too durable - the glue for the Velcro ain't great either.
However, nobody really makes a great 3" pad I've found.
-
Re: 3" cyan hydrotech pads disintegrating?
This sucks. So i guess all hydropads are junk. I have griots 3" pads but haven't polished enough to know their durability
-
Re: 3" cyan hydrotech pads disintegrating?
Just checked my pads...
Cyan: Velcro coming off and worn away in spots where the Velcro is
Tangerine: Worn away in spots where the pad meets the paint
-
Super Member
Re: 3" cyan hydrotech pads disintegrating?
I stopped using the cyan hydro-shred pads long ago for this same reason. Don't have really any issues with the Tangerine hyrdo pads, but the last time I used my remaining cyan pad, I ended up with a shop that looked like a cyan nightmare.
-
Super Member
Re: 3" cyan hydrotech pads disintegrating?
Didn't have too much love for the Hydrotech 4" I used last year either, Velcro separation, and moth eaten foam after little use.
-
Super Member
Rupes needs to make a non-tapered 3" pad with a 3" face.
-
Super Member
Re: 3" cyan hydrotech pads disintegrating?
I really hope this isn't the case with all the 3" hydro's. I just used a 3" tangerine on my GG da and it performed flawlessly on my Harley gas tank. The highest speed I used was 4.5 , then down to 3.
Similar Threads
-
By dlc95 in forum Wool & Foam Buffing Pads
Replies: 7
Last Post: 09-26-2014, 10:03 PM
-
By builthatch in forum Auto Detailing 101
Replies: 6
Last Post: 07-27-2014, 09:50 AM
-
By WRAPT C5Z06 in forum Auto Detailing 101
Replies: 18
Last Post: 01-12-2014, 07:42 PM
-
By WRAPT C5Z06 in forum Auto Detailing 101
Replies: 5
Last Post: 05-13-2012, 08:31 AM
-
By WRAPT C5Z06 in forum Auto Detailing 101
Replies: 10
Last Post: 03-27-2012, 05:20 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks