The way I understand it and use it, is like this:
Work in small areas when applying sealant. Do the entire vehicle and wait 45 minutes and then remove.
wolfgang dgps is a nice product how i do it it apply it 2X2 or 3X3 to the whole vehicle then take a break for 40-50 mins then come back to buff it off.
09 Subaru Sti (Lightning Red)
06 Subaru Sti (Rally Blue)
05 Scion XA RS2.0 (Spectra Blue Mica)
right on, so there is no cure time, after done buffing you cna move right to wax?
You really should wait 24 hours to let any sealant cure before topping with a wax. There may be a few exceptions but it would be beneficial to let the sealant cure and bond before a wax.
You really should wait 24 hours to let any sealant cure before topping with a wax. There may be a few exceptions but it would be beneficial to let the sealant cure and bond before a wax.
Best to give it at least 12 hours if you can before topping it.
Bookmarks