Wolfgang products turning black paint cloudy?

[steve2016]

Sorry guys, for some reason I'm just now seeing all the responses.

I'll take some pics asap.

As far as claying, the surface is very smooth.
Even while playing it didn't grab or leave residue on the clay.

I'm betting on CCF, but will know soon enough.

As far as polishing, I used a variable speed PC 2424.
I started out slow and worked my way to in speed
I also followed all the steps I've learned here.

Started by washing /claying, then Wolfgang Compound all the way to wax.
I'm using all of their products.
I haven't used the sealant yet because obviously I need to wait until it's right to move on to that step.

I've decided to go ahead and just have the hood painted in a couple weeks. Gonna start with that and see how it goes.
Obviously the car is 10yrs old, so it needs paint anyway...

Thanks for the comments/suggestions guys!!

[fightnews]

i bet its polish sticking to paint..i had same issue when i tried to correct 2012 crv honda paint..Tried so many polish (Hd polish+ , all griots boss polishes ) nothing worked most of them stuck on paint and were never able to get it off.left white residue like in ur case and was never able to get it off with quick detailer or IPA...use P21S Gloss Enhancing Paintwork Cleanser car polish - This pre-wax cleaner and polish is a German blend of quality ingredients that will make wax to remove the polish that is stuck on paint..this helped me to remove the white residue..now the trick i learned is add one drop of Meguiars #7 Show Car Glaze is a final step auto glaze to enhanced the gloss prior to wax application. Get a show car shine with Meguiars #7 Show Car to the pad along with the polish that you are going to use.. this will fix your issue.. i never had issue with Ultimate compound and polish from megs..worked great for my crv...tru P21s it will work..

where did u get the tip about adding a drop to your finishing polish? sounds good except that polish needs to be worked in with multiple passes and showcar glaze is supposed to be taken off wet after one pass not allowed to dry. sounds like the two products arent compatible?

[Nix]

found that on detailingworld forum..someone also had same issue as i did..it was mentioned in the thread that adding drop of glaze might help..so i tried it and it worked for me..but now i use ultimate polish and m205 which never gave me any issue..

[fightnews]

found that on detailingworld forum..someone also had same issue as i did..it was mentioned in the thread that adding drop of glaze might help..so i tried it and it worked for me..but now i use ultimate polish and m205 which never gave me any issue..

oh nice, i did half and half with pinnacle paint cleansing lotion and show car glaze once. it came out pretty good. i might do it again but just use a drop of show car glaze instead of half and half? what do u think?