Dislikes: 0
-
Newbie Member
Cutting with HF DA?
So, I haven't purchased as DA for detailing yet, but I'm pretty convinced I'd like to try the Harbor Freight unit. If it dies/is garbage, I'll chock it up to a life lesson and grab the Porter Cable 7424.
One of the first things I'd like to tackle when I pick it up, is bringing some oxidized gelcoat back to life. The gelcoat on my boat actually isn't that bad, but it could be a better.
The product I'll be using, Smoove Pro-Cut 1000, : Smoove Pro-Cut 1000 Professional Polishing Compound Quart : Sports & Outdoors[/url]) recommends a "white wool pad" to cut with.
So, I'm looking at picking up the following:
Lake Country 6" backer plate (Dual-Action Hook & Loop Flexible Backing Plate 6")
6.5" Wool pads (6.5 inch Marine 31 4 Ply 100% Twisted Wool Compounding Pad (3 Pack))
Will this be sufficient?
I'd also like to pick up some other basic pads for automotive detailing, but I haven't 100% tackled that decision yet as to what a basic setup might run me..
Anyone?
Last edited by Bobby B.; 03-21-2018 at 10:41 AM.
Reason: Posting link to Amazon
-
Super Member
-
Post Thanks / Like - 1 Thanks, 3 Likes, 0 Dislikes
-
Newbie Member
Cutting with HF DA?
Man, that thing shines!
My gel coat isn’t that bad really, it’s still got reflection ability, it’s just not been cleaned and polished like it should and I’d like to bring it back to life.
Does anyone make a 5” or 5.5” wool pad that would work with the HF DA? It may make more sense to just pick up a HF rotary as well, since they're cheap. Use it for the boat and then use the DA for upkeep on the boat..
I appreciate you’re help.
Here’s my current situation.
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Cutting with HF DA?
One of my friends did a boat with a PC, Megs M100, and Lake Country Purple Foamed Wool pads. Not the thin pads, but the long hair pads. Tore through the oxidation with ease. We also used them on a 32' Trailer.
-
Re: Cutting with HF DA?
This maybe?
5 1/2 Inch Thin Foamed Wool Pad (2-Pack)
With this compound.
SONAX CutMax Cutting Compound
Gelcoat is hard work for the polisher so a quality one you will benefit from the start. Gear driven orbital polisher like Flex 3401vrg is great or a Flex pe14 rotary polisher. If you need to do a finishing polish a free spinning DA would work when the oxidized is off.
-
Re: Cutting with HF DA?
Originally Posted by BellyUpFish
So, I haven't purchased as DA for detailing yet, but I'm pretty convinced I'd like to try the Harbor Freight unit.
If it dies/is garbage, I'll chock it up to a life lesson and grab the Porter Cable 7424.
If it dies or you can't maintain pad rotation under pressure get the Griot's Garage 6" ROP instead of the PC and then get the job done right and the fastest the second time.
Here's what you need to get into machine polishing - Recommendations for a beginner by Mike Phillips
I've been typing out articles on how-to remove swirls and scratches documented since 1994. That's 23 years. And that's just typing how to do. Been teaching people in person even longer. So please take my word for it... you need at a minimum what I call as simple or entry level orbital polisher.
My recommendation?
Get the Griot's Garage 6" DA Orbital Polisher. This one,
Griot's Garage 6" ROP - Standard cord
Griots Garage 6 Inch Heavy Duty Random Orbital Polisher - HD Cord - 25' Heavy Duty Cord already pre-wired
Why?
Because it's the best bang for the buck. There are cheaper polishers on the market but not better polishers for the value of your dollar plus Griot's backs this tool with a lifetime warranty. It also has all the power you'll need to take care of your own car or cars and for some of you, you could even detail cars for money with this tool.
Also - I don't really like playing the part of Forum Moderator, it's simply not fun. I like playing the part of "How-to Guy". But we don't have a lot of moderating that takes place on this forum so when I have to I do.
Here's the link to the forum rules, and below it the first rule. Note the part in red.
Forum Rules
The purpose of Autogeekonline.com is for detailing discussion, providing a place for likeminded auto "Geeks" to share knowledge and partake in fellowship.
1. The AutogeekOnline discussion forum is exclusively sponsored by Autogeek.com. Product discussion should be limited to products that are available from Autogeek.com and PBMA's family of websites.
Links, videos or recommendations to competing products and companies that are not available through Autogeek.com will be moved to the Moderators forum and offenders will be warned or simply placed into the SELF-BANNED category of member groups on this forum.
Repeated linking and recommendations of products not available through Autogeek.com may result in a permanent ban. Moderators have the right to edit any posts that contain links, recommendations or other information pertaining to competing companies that are not associated with Autogeek.com
Thanks for understanding, I know you're just trying to buff stuff out but there is a company that pays the bills around here and it's no Amazon, or eBay or Harbor Freight.
Last time I checked these three companies offered ZERO support for the junk they sell.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Cutting with HF DA?
As a current HF polisher owner, I'd say go with the Griot's. You'll need to upgrade the backing plate and pads anyway, so you might as well start with a good platform from the beginning.
The HF has decent power, but it isn't very smooth, it's loud, and the ergonomics aren't as good. Even though I use earplugs for hearing protection, I can't help but wonder if the vibrations and and lesser ergonomics make me more fatigued when I'm done doing a vehicle. I wish now I had bit the bullet and gone with the Griots years ago when I got into this hobby. It's much more expensive, but worth it in my book.
-
Super Member
Re: Cutting with HF DA?
Originally Posted by Desertnate
As a current HF polisher owner, I'd say go with the Griot's. You'll need to upgrade the backing plate and pads anyway, so you might as well start with a good platform from the beginning.
He’ll have to upgrade the backing plate on the GG6 as well... Unless he’s the 1% who plans on using it with 6” setup.
And neither polisher comes with pads, so there’s no need to upgrade what you don’t have to begin with.lol.
Just sayin.
-
Super Member
Re: Cutting with HF DA?
Originally Posted by Eldorado2k
He’ll have to upgrade the backing plate on the GG6 as well... Unless he’s the 1% who plans on using it with 6” setup.
And neither polisher comes with pads, so there’s no need to upgrade what you don’t have to begin with. lol.
Just sayin.
I wasn't sure if anyone would use a 6" on a boat. I've never cared for a boat and wasn't going to advise on something I didn't know anything about. Even with the 6" plate on the HF's, they are rarely balanced properly or not warped, so a new one would be in order most likely. As for the pads, some people may buy the pads hanging on the rack right next to the polishers. They are garbage, and if you don't know better like I didn't at the time, you might be tempted to go with what is readily at hand.
You never know a person's background or experience. I was just providing advice from the standpoint of someone whose been in a similar position.
-
Re: Cutting with HF DA?
You can go with a polisher and pad kit and get a good bang for the buck too. Then you can chose the HD version in the adding part of the the kit. This way you get some discount on the polisher and the pads. Then ad the polishes and the pads you like. The Griots Garage has some great polishes and pads to ad and I would get the LC purple wool pads also for your boat.
Griot?s Garage 6 inch Random Orbital Correct & Finish Combo LIMITED TIME ONLY!
Similar Threads
-
By JAMM0N in forum Wet-Sanding, Cutting & Buffing
Replies: 2
Last Post: 12-12-2014, 05:51 PM
-
By zkilo in forum Wet-Sanding, Cutting & Buffing
Replies: 3
Last Post: 06-05-2014, 04:01 PM
-
By runrun411 in forum Auto Detailing 101
Replies: 20
Last Post: 09-26-2013, 08:12 PM
-
By h00ligan in forum Auto Detailing 101
Replies: 1
Last Post: 05-09-2011, 09:10 PM
-
By RPM06 in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 6
Last Post: 07-13-2006, 06:42 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks