Open House Detail Day at Autogeek - Saturday, January 4th, 2020

[Dick Hoffman]

See you on the 4th of January.

Dick Hoffman

[Mike Phillips]

See you on the 4th of January.

Dick Hoffman

Looking forward to working with you again Dick.

[Mike Phillips]

... As I sit here at 20 past 8 on a Saturday night writing this, I realize that this time in a fortnight we will have just taken off from New Zealand on our 8000+ mile journey to Florida.

Dang that's a long trip.... longer than any I've undertaken.

Really looking forward to it & really looking forward to hanging out with the good folks at Autogeek for this Open House Day.

Aaryn NZ.

This Saturday Open House Detail Day is coming up FAST! I think we're going to have a good turn-out so we're going to be busy!


I'll be setting up for it on Friday and we start at 9:00am Saturday morning.

[Aaryn NZ]

Dang that's a long trip.... longer than any I've undertaken.


Saturday Open House Detail Day is coming up FAST! I think we're going to have a good turn-out so we're going to be busy!


I'll be setting up for it on Friday and we start at 9:00am Saturday morning.

A long way indeed Mike. It was around the 27 hour mark with stop overs etc & certainly a tiresome journey.

Super excited for the Open House Detail Day at Autogeek, a bunch of stuff I am eager to try out, especially the FLEX PXE & XCE tools.

We have changed our plans a bit so as we can get down to Stuart on the Friday instead of leaving Orlando super early on the Saturday morning. Unfortunately I don’t think we will get there in time to help set up on the Friday I’m sorry Mike. We don’t collect our rental car until 3pm.


Aaryn NZ.


Sent from my iPhone using AGOnline

[Mike Phillips]

Super excited for the Open House Detail Day at Autogeek, a bunch of stuff I am eager to try out, especially the FLEX PXE & XCE tools.

There should be a good mix of people and cars here. I let the local streetrod club know.

We have changed our plans a bit so as we can get down to Stuart on the Friday instead of leaving Orlando super early on the Saturday morning.

Take your time... traffic is crazy on a Friday.

Unfortunately I don’t think we will get there in time to help set up on the Friday I’m sorry Mike. We don’t collect our rental car until 3pm.

No worries - I got this...

[bigmike2249]

I will be there this Saturday! Cant wait to learn!

Michael Arango

[Mike Phillips]

I will be there this Saturday! Cant wait to learn!

Michael Arango

Cool.

How far are you travelling to be here?

[bigmike2249]

Cool.

How far are you travelling to be here?

From Pembroke Pines. So about 1.5 hours. Not too bad

[Mike Phillips]

From Pembroke Pines. So about 1.5 hours. Not too bad

Gotcha - still a good drive.

Thank you for clearing your schedule and attending.

Normally AFTER events like this I get asked,

When's the next one?


If there is a next one, it will be the same time next year.

[Mike Phillips]

Chervon, (they own FLEX), sent me a cordless Hammer Drill for my own use.

I've been meaning to purchase a cordless drill for cleaning wheels using the Wheel Woolies Power Woolie 12X. The key thing with a cordless tool is you cannot get shocked like you could with any tool you have to plug into a wall outlet. So thank you Chervon.

I've attached the Wheel Woolies Power Woolie 12X and anyone attending the class this weekend will have a chance to test this out on the barrels of their wheels.







I've used these brushes in the past and they work great as long as you have enough clearance between the inner barrel surface and your brake rotors. So naturally, it works best with larger vehicles with larger wheels.


Get yours here,

Wheel Woolies Power Woolie 12X