Bentley Azure Tips or Pointers

[SeaJay's]

I have a Bentley Azure (I believe...pics below) lined up for a pretty standard interior & exterior detail tomorrow. No polishing and no real heavy contamination other than the rims have a decent amount of brake dust and there is some road grime.

Just wanted to see if anyone had any experience with these vehicles and could offer up any tips or pointers.

Any suggestions for what to use on the convertible top. It doesn't look like a standard canvas or vinyl top. So, just want to ensure I take the utmost caution with any products that I use. Obviously I'm going to be extra careful with my choices and ensure that I'm not inflicting any more damage to this vehicle. It appears to have gone through a swirl-o-matic several times either that or the previous detailer...Going to work on that in the future.

Here are the pics...sorry taken with my iPhone.

[SeaJay's]

2 hours till I detail this beauty....

[Flash Gordon]

2 hours till I detail this beauty....

Clean the top like any other. Get wet, spray apc, scrub and rinse. Work in small sections

Is the grill covered in waterspots? Beautiful car Jason

[LuxuryMobile]

My best advice is to not over think it.

You have been doing exceptional jobs on cars for years. Just do what you do best.

[Royaldetail]

I was told not to polish the metal on a Rolls-Royce or a Bentley because of the way it's made with nickel I haven't done any more research but that's what the Rolls-Royce guy told me and Swiss wax you may want to find out about that because the metal will eventually deteriorate and start peeling

[Cosmin]

if is not soiled, a damp mf towel with onr to wipe down the top , that should work , add some fabric guard and is it all set.
the best way to clean the interior is with top down ,most likely it has leather on doors , console , dash and maybe wood trim , 303 should take care of all that.
keep it simple.

[SeaJay's]

Did the Bentley yesterday and it came out great. Pics and write up to come soon.

The metal didn't need any polishing as it was all in good shape. Just cleaned and sealed it all.

[BobbyG]

Did the Bentley yesterday and it came out great. Pics and write up to come soon.

The metal didn't need any polishing as it was all in good shape. Just cleaned and sealed it all.

Cool Jason, I was just going to ask you to post some....I'll bet they look grand!!