Thanks: 0
Likes: 0
Dislikes: 0
-
Paintless dent removal
I had a dent removed using this this technique today. The result was impressive but not perfect. The dent is gone and the paint is unharmed. But, when the light is right, you can see a screen pattern where the dent was. I can't feel it but I can see it in some light. My question is can I buff that out?
-
Super Member
Re: Paintless dent removal
Wouldn't hurt to try, IMO
It is no coincidence that man's best friend cannot talk.
-
Super Member
Re: Paintless dent removal
Sounds like little pick marks in the metal from the guys tooling and process. I've seen that many times and if that is the case DO NOT try to sand or polish it out. If you do you'll risk going through the clear coat at each of the high points and then it will stick out like a sore thumb.
I'd live with it and put whoever did the repair on my list of "do not go to this guy again". He's obviously not at the top of his profession if you see even the slightest hint that a repair was done.
I'm lucky enough to have found a paintless dent guy that does absolutely perfect work through my brother-in-laws body shop.
-
Regular Member
Re: Paintless dent removal
Originally Posted by 2black1s
Sounds like little pick marks in the metal from the guys tooling and process. I've seen that many times and if that is the case DO NOT try to sand or polish it out. If you do you'll risk going through the clear coat at each of the high points and then it will stick out like a sore thumb.
I'd live with it and put whoever did the repair on my list of "do not go to this guy again". He's obviously not at the top of his profession if you see even the slightest hint that a repair was done.
I'm lucky enough to have found a paintless dent guy that does absolutely perfect work through my brother-in-laws body shop.
not sure I would say to put them on a list to never go back. its a constant learning process, just like detailing. Everyone has to learn, right? Ive done PDR for the last almost 2 years and everyday is like learning something new.
-
Super Member
Re: Paintless dent removal
I would let them learn on someone else’s car. Just like vehicle painting or detailing, practice before you touch a paying customers car, and have insurance if you do any of these things for a living.
-
Super Member
Re: Paintless dent removal
I actually just recomended my son to a Pdr guy.
I wish i had try to get into this a long time ago,
Can you tell me What it takes to learn this art?
Do these guys go to a school to learn it? And aproxamitly how much are the tools they use?
-
Re: Paintless dent removal
I had some major hail damage on my car a couple months back that insurance covered PDR removal of all of it. The end result was quite impressive. Overall I am happy with the results.
I did notice an area on the hood that has the screen look in the clear coat from the tech's tapping and tools. Can only be seen in the right light. It seems some if you are suggesting that I complain about this to the shop. However my concern is that I'll end up with a worse end result. In other words and unfortunately I was going to leave it be and live with it. Thoughts?
-
Re: Paintless dent removal
Originally Posted by asalesagent912
I actually just recomended my son to a Pdr guy.
I wish i had try to get into this a long time ago,
Can you tell me What it takes to learn this art?
Do these guys go to a school to learn it? And aproxamitly how much are the tools they use?
They have schools for PDR. I would say someone with two years would start to have a pretty good grasp on things.
PDR tools are not cheap. Quality ones anyway. You could have $5k-$10k in a kit easy.
-
Regular Member
Re: Paintless dent removal
Originally Posted by asalesagent912
I actually just recomended my son to a Pdr guy.
I wish i had try to get into this a long time ago,
Can you tell me What it takes to learn this art?
Do these guys go to a school to learn it? And aproxamitly how much are the tools they use?
I went to a school out in Costa Mesa, CA. It was 2 weeks and then back to home. Its tough because for the 2 weeks they show you the basic techniques and then when you're home, your basically by yourself trying to improve when you really don't know how things should be. I can do small dings and I like hail but larger dents and body line dents I just cant grasp.
Tools can definitely be pricey, but pay for themselves fast! If your a good pdr tech you can make like 80k+ a year. Ive even seen "Storm Chasers" that do strictly hail make like 120k+.
Originally Posted by Vanquish Auto
They have schools for PDR. I would say someone with two years would start to have a pretty good grasp on things.
PDR tools are not cheap. Quality ones anyway. You could have $5k-$10k in a kit easy.
so true
Similar Threads
-
By juguina in forum New Car Care Products
Replies: 1
Last Post: 01-31-2018, 11:35 AM
-
By d33p in forum Auto Detailing 101
Replies: 5
Last Post: 05-28-2015, 07:32 PM
-
By Lakeside Detail in forum Auto Detailing 101
Replies: 4
Last Post: 03-02-2014, 10:47 AM
-
By GiXx in forum Off-Topic
Replies: 1
Last Post: 03-29-2009, 12:57 PM
-
By chrisbothwell in forum Off-Topic
Replies: 9
Last Post: 07-27-2007, 10:11 AM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks