autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 

» Detailing Classes

New Dates Available for the Autogeek Roadshow!
Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Dec 2009
    Location
    Chula Vista, CA
    Posts
    34
    Post Thanks / Like

    Pressure Washer Wall Mount Ideas

    Hey guys,
    I just purchased a small Ryobi 1600 psi electric at HD for $99 and spent $440 on complete Mosmatic/MTM - 50ft hose, gun, wand, foam cannon and fittings from Obsessed Garage. I'm now looking to set everything up by mounting on the wall.

    My main question is: Can I place the electric pressure washer on its side or will it affect the motor or pump in any way?

    The Ryobi has the inlet and outlet on exact opposite sides and I want the hoses to be placed as efficiently as possible.



    Thanks!


  2. #2
    Senior Member
    Join Date
    Dec 2018
    Posts
    293
    Post Thanks / Like

    Re: Pressure Washer Wall Mount Ideas

    Look in manual. Should be email and phone number to customer service. Question better suited for Manufacturer.


    Sent from my iPad using Tapatalk

  3. #3
    Senior Member ntwillie1's Avatar
    Join Date
    Feb 2013
    Location
    USA
    Posts
    200
    Post Thanks / Like

    Re: Pressure Washer Wall Mount Ideas

    I had that same unit and it lasted about a day. Hope yours works out better. Interested in end result on mounting.
    2005 Nissan 350z (Polish Angel Viking-Coat)/2017 MB GLE43 (CQuartz/Gloss-Coat/Opti-Seal)/2012 Honda Odyssey TE (Hydro2)/2014 MB CLS550 (Gyeon Mohs Q2 and Cure)

  4. #4
    Senior Member machz's Avatar
    Join Date
    Mar 2012
    Location
    NH
    Posts
    156
    Post Thanks / Like

    Re: Pressure Washer Wall Mount Ideas

    I have the same unit and I have had it mounted in my garage for over a year and have been very happy with it. I did not place it on its side I just welded up a metal platform then bolted it to that. I did replace the gun and put a 50ft hose on it.

  5. #5
    Member
    Join Date
    Dec 2009
    Location
    Chula Vista, CA
    Posts
    34
    Post Thanks / Like

    Re: Pressure Washer Wall Mount Ideas

    Quote Originally Posted by machz View Post
    I have the same unit and I have had it mounted in my garage for over a year and have been very happy with it. I did not place it on its side I just welded up a metal platform then bolted it to that. I did replace the gun and put a 50ft hose on it.
    Hi machz, would you be able to upload a photo of your setup? I'd like to see how you bolted it down. Thanks!

  6. #6
    Senior Member machz's Avatar
    Join Date
    Mar 2012
    Location
    NH
    Posts
    156
    Post Thanks / Like

    Re: Pressure Washer Wall Mount Ideas

    I will have to wait until spring as I have it disassembled and put away for winter I picked up some square tubing from home depot but you could use wood if you wanted I then welded a square so the feet from the pressure washer sat on it. I made two L brackets to bolt to the studs in the wall. Mine has feet that I drilled through and used bolts and washers. For yours I would just use a couple of velcro straps over the PW to hold it to the frame or a ratchet strap would work.

  7. #7
    Junior Member
    Join Date
    Apr 2018
    Posts
    1
    Post Thanks / Like

    Re: Pressure Washer Wall Mount Ideas

    Quote Originally Posted by CalSun Detail View Post
    Hi machz, would you be able to upload a photo of your setup? I'd like to see how you bolted it down. Thanks!
    Maybe this will help. Here is my install which is still in process. I thought the Ryobi would be temporary but it is holding up well so far.


    Pressure Washer Wall Mount Ideas-ryobiwall-jpg

  8. Likes BudgetPlan1, chet31 liked this post

Similar Threads

  1. DIY Pressure Washer Wall mount, shelves, reel, etc. Plans inside
    By Daviddear30 in forum Auto Detailing 101
    Replies: 26
    Last Post: 11-04-2018, 05:34 PM
  2. Pressure washer-various uses (ideas?)
    By Daviddear30 in forum Auto Detailing 101
    Replies: 14
    Last Post: 07-28-2014, 05:25 PM
  3. NEW Wall Mount Metro Vac N Blow
    By Meghan in forum New Car Care Products
    Replies: 5
    Last Post: 06-11-2014, 01:19 AM
  4. Wall mount vac
    By Buggy Bath in forum Auto Detailing 101
    Replies: 7
    Last Post: 04-26-2012, 12:17 AM
  5. anyone have the hoover wall mount vac?
    By BrandonJ in forum Auto Detailing 101
    Replies: 2
    Last Post: 04-15-2012, 09:36 AM

Members who have read this thread: 61

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» February 2019

S M T W T F S
2728293031 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 12