Help!! Water spots!

**Scoobertin** · 06-16-2016, 05:36 AM

Originally Posted by cleanfreak3

My truck has Wolfgang Sealant and topped with Pinnacle Spray wax...the vinegar needs to be rinsed off? I have a clean surface, but it just contains the water spots.

Did you get your water spots taken care off? I have WG sealant on my vehicle and never had an issue with water spots when taking it to a coin opt for rinsing with just water. After the high pressure water rinse I use the no spot rinse and drive it home and proceed to wash vehicle at home and never had an issue. The water just slid off on the way home.

**cleanfreak3** · 07-05-2016, 03:39 PM

Yes I got them taken care of. I mixed up some vinegar and Wolfgang uber rinseless, misted and wiped my truck down and they disappeared.

**figgie** · 07-19-2016, 10:42 AM

well for future reference (as I am sure you learned).

Do not let the water dry on the paint, even if it is soft water. Once you are done rinsing the car. start drying. This will at the very least minimize water spotting and at best, help you avoid them all together.

**cleanfreak3** · 08-17-2016, 06:42 AM

Originally Posted by figgie

well for future reference (as I am sure you learned).

Do not let the water dry on the paint, even if it is soft water. Once you are done rinsing the car. start drying. This will at the very least minimize water spotting and at best, help you avoid them all together.

I like to go to the coin opt and spray off the vehicle before doing a rinseless...obviously I can't start drying until after I perform the rinseless wash. Not sure what to do differently.