Looking for second smaller polisher...

[lashedup]

So I already have a long throw DA in the tool box. I'm looking for something smaller to get into those tight areas.

- Do I look for a rotary where I have more control of the head location (as opposed to DA where the tool sweeps in a larger pattern)? If so should I get the Porter Cable or the Flex PE8?

- Or do I look for something like the Rupes 75mini?

Thanks in advance for the suggestions!

<edit>Now thinking about it, is the throw pattern on the PC 7424 less than the Rupes 75mini?

- j

[Mike@DedicatedPerfection]

Personally for me I almost always pick up my PE14 equipped with 3" pads for tight areas as I know exactly what is going on. If I don't use this tool then my other option is the GG3.

The longer the throw of the smaller machine may not allow you to get into really tight areas.

[custmsprty]

Rupes Mini, awesome machine and very user friendly.

[Billy Baldone]

I use my PC with 3" pieces

[whavens]

I have the GG 3" and the problem with it is that it will bog down easily. Proper technique is a must. It is perfect for applying LSPs. I have found that for under mirrors, I have better luck with my Flex with large pads, because the extra width allows me to get further under the mirror. I do like the Rupes Mini and will be adding one to my arsenal soon.

Walter

[lashedup]

Thanks for the suggestions. Ordered a Rupes 75 mini last night and some pads.

[Ccrew]

Thanks for the suggestions. Ordered a Rupes 75 mini last night and some pads.

Good choice. I gave the 3" GG and honestly think it would be best for the wife on the lonely nights I'm on business trips. It is essentially a big red vibrator.

Vega I think it was however said that with the Rupes pads the GG can actually do correction although I have yet to try. I went the PE8 route.

[lashedup]

Good choice. I gave the 3" GG and honestly think it would be best for the wife on the lonely nights I'm on business trips. It is essentially a big red vibrator.

LOL. Excellent. I'm guessing Griot's didn't have that idea in mind. Might kill someone...

[Kamakaz1961]

I use my PC with 3" pieces

I have set my PC7424XP to handle everything from 1" Pads to 5" Pads. I have the PE8 and it is awesome. When I compound with the PE8 is just polish with the PC7424XP with the right adapters. That way there is no chances of holograms.

With the same adapters you can make any DA that accepts the PC Backing plates do the same thing.

My Flex 3401 is my primary DA

[VISITOR]

I have the GG 3" and the problem with it is that it will bog down easily. Proper technique is a must. It is perfect for applying LSPs. I have found that for under mirrors, I have better luck with my Flex with large pads, because the extra width allows me to get further under the mirror. I do like the Rupes Mini and will be adding one to my arsenal soon.

Walter

SEMA is around the corner and who knows what's coming out, i would wait...