Thanks: 0
Likes: 0
Dislikes: 0
-
How long does it take for Menzerna to break down on average?
Hello guys,
I tried to polish very light swirls with Menzerna Final FInish, and it took forever but the polish still won't break down.
How long on average does the FInal finish take to completely break down?
I used a 3M black polishing pad, about 4 dots of polish on the pads, and worked on a 2x2 section (hood). I started with 600 rpm about 1-2 pass, followed by 900 rpm about 2-3 pass, 1200 rpm about 7-10 pass, back to 900 rpm about 2 pass. I polished the section for about 10 minutes and the polish doesn't even begin to dry, it's still wet.
I barely push the rotary with my left hand, but I just let it glide under its own weight. Could this be the part where I did wrong? Also, should I use higher rpm, 1500 rpm maybe ?
Thanks in advance guys! and thanks Mike!
Similar Threads
-
By nrosdal in forum How to make money detailing cars
Replies: 23
Last Post: 09-16-2017, 02:08 PM
-
By Delicate Touch Auto in forum How to make money detailing cars
Replies: 9
Last Post: 05-26-2016, 09:42 AM
-
By allenk4 in forum Products Guides
Replies: 16
Last Post: 09-27-2014, 03:32 PM
-
By CaneCharger in forum Auto Detailing 101
Replies: 23
Last Post: 07-25-2011, 08:33 AM
-
By DantheMan in forum Introduce Yourself
Replies: 4
Last Post: 09-13-2010, 08:30 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks