Remove white lithium grease

**pnut** · 09-22-2009, 12:13 PM

Overspray of white lithium grease is all over the door jamb and various places. I want to remove it but so far P21s, purple power, and dawn all don't work.

Ideas?

**karburn** · 09-22-2009, 02:44 PM

Yikes. Maybe some type of tar or adhesive remover. 3M makes a good one. Stoner's has a product, too. Maybe try plain old alcohol first.

**DLB** · 09-22-2009, 03:07 PM

Surf City Garage's Road Trip.
The stuff will make tar come off like soap, so I would imagine it would break down the grease pretty well too.

My local Pep Boys carries the line.

DLB

**Finemess** · 09-22-2009, 04:29 PM

You could try some WD-40.

**loudog2** · 09-22-2009, 04:30 PM

That's some thick stuff. I use it on my Flex. Stoner's Tarminator would work.

**Jimmie** · 09-22-2009, 05:27 PM

Originally Posted by loudog2

That's some thick stuff. I use it on my Flex. Stoner's Tarminator would work.

first product that I thought after you said the stuff that you tried didn't work.

**ScottB** · 09-22-2009, 06:34 PM

3M Wax and Adhesive Remover ... can get it locally as needed. Comes in spray or canister version as needed too.

**vwgtivw** · 09-22-2009, 10:01 PM

**Matt** · 09-23-2009, 05:32 AM

Just a question, was this used to grease the window tracks? Coz I'm looking to grease my window tracks and I was going to use White Lithium Grease.

If it's that hard to remove any overspray I'll have to make sure I'm extra careful to avoid any overspray.

**pnut** · 09-23-2009, 06:59 AM

Originally Posted by Matt

Just a question, was this used to grease the window tracks? Coz I'm looking to grease my window tracks and I was going to use White Lithium Grease.

If it's that hard to remove any overspray I'll have to make sure I'm extra careful to avoid any overspray.

I was used on my door hinges (not by me). I have used it before though and it tends to splatter everywhere, not clean or easy to use in the spray can.

I'll try the 3m stuff (which I happen to have). Thank you.