Need Help with FlexXC 3401

**ajm1969** · 11-14-2008, 02:51 PM

Originally Posted by loudog2

Don't be scared. Nothing is going to happen. Just don't leave it sitting in one spot for a long time. Other than that, you'll be fine.

So just put a dab of swirl remover on the pad and go for it

**loudog2** · 11-14-2008, 04:47 PM

A quarter size in the middle, or 3 small dabs along the edges is fine. Spread polish while it's off. Then turn it on sped 3 to spread onto the working area. Bump speed up to 6 and go to town. Work a 2ft x 2ft section at a time. Move slow, and overlap each pass. It's not like a rotary. It wont burn the paint that easily.

**ajm1969** · 12-20-2008, 05:52 PM

Ok everyone i used the flex today and god do i love it. But my next question is can you wash the Lake County Pads ? I did not have the money to get the cleaner bucket.

Thanks

**loudog2** · 12-20-2008, 10:02 PM

Get the pad rejuvenator(DP, Wolfgang). Mix it in a bucket with water and let the pads soak. Use your thumb to get the polish, sealant or wax out. Some people use Dawn dish soap.