-
Super Member
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Clear Cut vs SHC300 vs M101 vs S2 vs Mothers HD
We had Mille here in Finland back in august
https://www.instagram.com/p/BYOk2YQngJX/
I didnt like it so i sold it. I get better correction with MK2's and i have also Festool Shinex.
Going to order Clear cut compound today
-
Re: Clear Cut vs SHC300 vs M101 vs S2 vs Mothers HD
Originally Posted by
Joel1979
We had Mille here in Finland back in august
https://www.instagram.com/p/BYOk2YQngJX/
I didnt like it so i sold it. I get better correction with MK2's and i have also Festool Shinex.
Going to order Clear cut compound today
Wow, surprised you didn't like it. I have feeling I will like it way better than my 3401.
-
Regular Member
Re: Clear Cut vs SHC300 vs M101 vs S2 vs Mothers HD
The Car-Pro website says "In some cases and with the correct combinations this incredible next-gen compound may also be used as a 1 step product!" I know every car is different, but in your professional opinion, how would this be accomplished on a VW? I did my wife's Tiguan in the summer, and it was very difficult to clear all the defects.
My question is; since it's a heavy cut compound,(I think), wouldn't it be followed up with a lighter compound? Or could I go right to a wax or a sealant? After "the correct combination" is used.
-
Re: Clear Cut vs SHC300 vs M101 vs S2 vs Mothers HD
Originally Posted by
WRAPT C5Z06
Wow, surprised you didn't like it. I have feeling I will like it way better than my 3401.
Beats VRG hands down. Cuts more, vibrates less and walks less.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Re: Clear Cut vs SHC300 vs M101 vs S2 vs Mothers HD
Originally Posted by
h8dirtycars
My question is; since it's a heavy cut compound,(I think), wouldn't it be followed up with a lighter compound? Or could I go right to a wax or a sealant? After "the correct combination" is used.
Depends on the hardness of the paint and the way it finishes.
-
Super Member
Re: Clear Cut vs SHC300 vs M101 vs S2 vs Mothers HD
All this talk... and no pics?!? What a tease!
I'm excited to try Clear Cut when I get the chance.
Retired Professional Detailer
-
Re: Clear Cut vs SHC300 vs M101 vs S2 vs Mothers HD
Originally Posted by
zmcgovern45
All this talk... and no pics?!? What a tease!
I'm excited to try Clear Cut when I get the chance.
Too busy bud to do show and shine write ups, take pics etc. After a full days detail its family and relaxation time.
-
Re: Clear Cut vs SHC300 vs M101 vs S2 vs Mothers HD
Originally Posted by
Joel1979
Beats VRG hands down. Cuts more, vibrates less and walks less.
Definitely beats the 3401 no doubt about that.
Bookmarks