Cloth fender liner cleaning

[ohten]

I recently purchased a 17 Jeep Grand Cherokee for my drive to work and errand vehicle.I show up to work at remote locations and when it rains its usually a muddy mess.The Jeep comes with felt or cloth fender liners,HOW IN THE HELL DO YOU CLEAN THEM(LOL) without destroying them.South Florida dirt roads is a hodgepodge of material sand,sea shells,dirt and whatever and it does not take long before your fender wells are a light to white sand color.

[yakky]

APC and a pressure washer work well for me.

[jmeyers278]

my jeep, durango, and lincoln all have cloth wheel well liners. It is to keep road noise down but it is a pain. Remove loose stuff with power washer, spray with APC, let rest, agitate with long handle brush...I use the mother's one and it works pretty good, rinse with power washer.

[ohten]

I really didn't want to purchase a pressure washer because I am running out of room in my garage.I have the Jeep on one side of the garage and a Challenger on the other.As you know neither one of these puppies are small.I guess I will have to stop at a self wash bay and use their spay wand.

[KirkH]

I use a brush.

https://www.youtube.com/watch?v=GcfPhScHN2k

[jmeyers278]

I use a brush.

https://www.youtube.com/watch?v=GcfPhScHN2k

this would work on my navigator, but you can barely fit a fender brush between the tire and wheel well on my Durango.

[KirkH]

this would work on my navigator, but you can barely fit a fender brush between the tire and wheel well on my Durango.

That is a 2016 Camaro that I am cleaning in the video. The wheel is off.

[SYMAWD]

For mud, a pressure washer. For everything else, just brush them while dry if you don't have a pressure washer.

[Rtrick87]

this would work on my navigator, but you can barely fit a fender brush between the tire and wheel well on my Durango.

I can fit brushes into my Durango wheel well no problem. But I don’t have 20s for rims. You could turn the wheels at least for the front to get a good cleaning. But I also put scotchgard once a month three layers on my liners. But when I detail cars with tight wheelwells like the charger, challenger or bmws I use a long handle no bend skinny cone shaped bristle brush.


Sent from my iPhone using Autogeekonline mobile app

[TMQ]

Scotchguard...

https://www.youtube.com/watch?v=zwtd0pk3wIU

Tom